INTRODUCTION
Foundation is one of the most critical components of any structure, as it transfers loads from the superstructure to the underlying soil. However, foundation failures remain a common cause of structural failures due to the inherent uncertainties associated with soil behaviour. In addition to geotechnical complexities, software applications for foundation design also play a vital role. Modern tools such as SAFE and STAAD Foundation Advanced, based on the finite element method (FEM), have become essential in foundation engineering. Therefore, understanding their working methodologies and limitations is crucial for ensuring safe and efficient designs. Another key aspect of foundation design is the interface between geotechnical and structural engineers. A strong collaboration between these disciplines can significantly enhance the quality of foundation solutions.
We have received numerous queries regarding a specialized course on foundations. In response, we are pleased to announce RCC-STR-003: Foundation Engineering (Part 1), commencing on 20-FEB-25. This course aims to address the critical aspects of foundation design, bridging the gap between software applications and fundamental engineering principles.
What to Expect in the Course?
- Finite Element Analysis of Foundations
- Introduction to foundation design using SAFE and STAAD Foundation Advanced
- Comparative analysis of results from both software against manual calculations
- Understanding the Geotechnical-Structural Interface
- The importance of collaboration between geotechnical and structural engineers
- Overview of key IS codes related to geotechnical engineering
- Foundation Design Using SAFE (as per IS 456:2000)
- Hands-on design exercises and interpretation of results
- If requested by participants, foundation design in STAAD Foundation Advanced as per ACI 318 will also be covered
- Case Studies
- Isolated foundations, Combined foundations, Octagonal foundation for tall vertical vessels (Oil & Gas industry), Foundations for cantilever retaining walls, Foundations for transmission line towers, Annular raft foundations for chimneys, Raft foundations for tall buildings, etc.
- Enhancing the Quality of Geotechnical Investigations
- Discussion on critical areas that can improve the accuracy and reliability of soil investigations
By the end of this course, participants will not only gain a deep understanding of foundation design methodologies but will also be equipped to develop in-house design procedures, checklists, and best practices for their organizations.
A detailed session-wise breakdown is provided in the course brochure.
Join us in this journey to master foundation engineering with practical insights and industry-relevant knowledge!
WHAT IS UNIQUE ABOUT THIS COURSE?
- The course is designed by the experienced engineer (Mr. Bhavin Shah) who has more than two decades of experience in the field of structural engineering.
- The entire course is designed from the practical aspects which can be readily used in the real projects.
- The course is designed to have an interactive mode so that the problems / doubts of the participants can be addressed effectively.
- A WhatsApp group will be created for quick communication between the participants and the faculty. The participants will be able to share the discussion points, doubts, queries, etc. in the group. The details in the group will be collated for further discussion in the next session.
- All the sessions will be recorded and recording of each session will be shared within few hours. If someone miss out the live session then he/she can go through the recording before attending the next session. After going through the recording, the participants can share their doubts/queries in the WhatsApp group, which will be addressed in the next session.
- If desired, participant can also opt for self-paced learning.
- Recording will be available with all the participants for 180 days. Additional six months of access can be purchased with only 10% of total fees.
- Certificate for participation will be issued on successful completion of the online course (to avail the certificate, it is mandatory to submit the assignments as per schedule).
- The course is designed as a process of learning together.
WHO SHOULD ATTEND?
This course will be useful for following:
- Practicing Structural Consultants
- Senior Structural Engineers in the company
- Junior Structural Engineers in the company
- Owner’s consultants
- Proof checking consultants
- Research scholars, Academicians
- Post Graduate students in Structural Engineering
- Civil engineering students who are interested in Structural Engineering.
COURSE FACULTY
Mr. Bhavin Shah (Founder & CEO, SQVe Consultants) is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures. He has conducted similar offline programs for large engineering setup.
METHODOLOGY
- The entire course is designed in the ONLINE mode.
- The course will have 44+ contact hours (~24 hrs. online+ ~20 hrs. for working on assignments).
- During the program, the interaction can be done with faculty and the participants using WhatsApp.
- Fundamentals and the concepts will be demonstrated through study models in the software.
- The online sessions will be conducted using ZOOM software.
COURSE SCHEDULE
| Start Date | 20-FEB-2025 |
| End Date | 13-MAR-2025 |
| Total contact hours | 44+ contact hours (~24 hrs. online+ ~20 hrs. for assignments) (Sessions will be arranged on Monday to Friday from 8:30 PM to 10:00 PM IST.) ## |
| Details of each session | Please download brochure of the course for details of each session. |
All the sessions will be recorded and recording of each session along with the course material will be shared within few hours at our online portal. If one has opted for self paced course or someone miss out the live session then he/she can go through the recording before attending the next session. The participants can share the queries in the WhatsApp group, after going through the recording which will be addressed in the next session. The recordings and course material can be accessed for 180 days.
FEES FOR THE COURSE**
| For participant from India | Cost per participant shall be 14,750 INR (inclusive of 18% GST). |
| For students pursuing Post graduation or Graduation from India | Cost per participant shall be 11,800 INR (inclusive of 18% GST). |
| For participant outside of India | Cost per participant shall be 225 USD. |
**Discount offered:
- To avail discounted fees for student, the participant shall have official email address of the institute. Please connect with us at email address for more details: concrete@sqveconsultants.com
- For continuous learner: If you have attended earlier one course of SQVe Consultants than 5% of discount will be offered. For prior two courses, 10% of discount will be offered. For three or more prior courses, 15% of discount will be offered. To avail the discount, please connect with us through the above-mentioned email address. We will arrange to send an invoice considering the discount for online payment.
- Group participation from a company or institute is encouraged to get the discounts on this course. For more details, pl contact us at the above-mentioned email address.
HOW TO REGISTER FOR THE COURSE?
Please click on the following button “Register Now” and you will be directed to the payment page. Your registration will be confirmed after receipt of the payment at portal.
Kindly note that there are limited seats.
Important notes:
- For any payment related queries, please contact us at email address: concrete@sqveconsultants.com
- Applicable discount is not automated at online portal. For availing the same, please connect with us through the above mentioned email address.
- Above Payment gateway is configured ONLY for Indian participants. Interested foreign engineers can contact us at the email address : concrete@sqveconsultants.com. An invoice will be shared through PayPal for online payment.
Feedback of the few participants from the previous online courses:
Ravichandra
STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.
Tarnpreet Singh Gill
The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.
Sujata Gupta
It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.
Praveen Vasishth
STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.
Shefali Thakkar
STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.
Akash Solanki
STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.
Tanuja Singh
STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.
Dhirender Singh Bisht
I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.
RATHISH V R
I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!
Shreyas Barad
STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.
Rajen Dharia
On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.
Your any queries/ doubts related to the course may be addressed to the email address: concrete@sqveconsultants.com
Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW
Visit our online store: All popular online courses are stored at online portal. Access of the same can be purchased. Link: https://academy.sqveconsultants.com/store
Get access to customised packages created from 194 recorded sessions (with 300+ contact hours). Choose the package as per your requirements: https://sqveconsultants.com/recorded-sessions
Join YouTube channel of SQVe Academy | In return, you will get access to all member-only videos and the other perks at YouTube. There is nominal monthly subscription fees which can be cancelled at any time.
Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few
You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join
Purchase E-books by Er. J. D. Buch
Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/
Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (17K + subscibers): Link: https://youtube.com/c/StructuralEngineering
Join telegram group for technical discussion related to structural engineering (9K + members): Link: https://t.me/structuralengineering1
Register to receive updates from SQVe through email: