INTRODUCTION
Earthquake resistant design is becoming increasingly complex as we are gradually aligning to the global design practices. It is required to perform different types of analysis for seismic design such as response spectrum analysis, p-delta analysis, nonlinear static analysis (pushover analysis), nonlinear dynamic analysis, etc. It is imperative to understand the overall methodology, limitations as well as software applications for each type of analysis. Because, if type of analysis considered is not appropriate or if the software application is not right then the intended purpose of earthquake resistant design won’t be achieved. Following are few of the clauses wherein advanced analysis are required as per IS codes.
IS 800:2007 mentions that the structure should be able to withstand inelastic displacement corresponding to joint rotation of 0.04 rad for Special Concentrically Braced Frames and for Special Moment Frame. As per IS 1893 (Part 4):2015, nonlinear time history analysis is required to verify the collapse mechanism as well as P-delta analysis is mandatory for all industrial structures. Nonlinear static analysis and nonlinear dynamic analysis are required as per IS 16700:2023.
In view of the above, we are glad to launch a unique online course EQ-STR-004: “Different types of analysis” which will exclusively focus on the advanced structural analysis along with the software applications in ETABS. Following types of analysis which will be considered in the course:
- Response spectrum analysis
- P-Delta analysis
- Nonlinear static analysis (pushover analysis)
- Linear time history analysis
- Nonlinear time history analysis
For earthquake resistant design, it is utmost important to understand the basics of structural dynamics. Therefore, in the course, we will start with fundamentals of structural dynamics wherein we will understand single degree of freedom, mode shapes, natural frequency, time period, acceleration, damping, resonance, etc. along with study models in ETABS. Thereafter, we will consider detailed discussion on each type of analysis wherein we will discuss software application along with the fundamentals. We will experiment different types of analysis on study models of single storey as well as for G+30 building. Results obtained from different types of analysis for the similar buildings will be compared. The participants will be encouraged to apply the same concepts whether on study models or on real projects and share their findings or queries during the course. The entire course is designed as a process of learning together.
The entire course will be extremely useful for preparation of in-house check-list, working procedure, Do’s and Don’ts, etc. for different types of analysis for buildings.
WHAT IS UNIQUE ABOUT THIS COURSE?
The course is designed by the experienced engineer (Mr. Bhavin Shah) who has more than two decades of experience in the field of structural engineering.
- The entire course is designed from the practical aspects which can be readily used in the real projects.
- The course is designed to have an interactive mode so that the problems / doubts of the participants can be addressed effectively.
- A WhatsApp group will be created for quick communication between the participants and the faculty. The participants will be able to share the discussion points, doubts, queries, etc. in the group. The details in the group will be collated for further discussion in the next session.
- All the sessions will be recorded and recording of each session will be shared within few hours. If someone miss out the live session then he/she can go through the recording before attending the next session. After going through the recording, the participants can share their doubts/queries in the WhatsApp group, which will be addressed in the next session.
- Recording will be available with all the participants for 180 days.
- Certificate for participation will be issued on successful completion of the online course (minimum 80% of attendance is required).
- We will create a focused group of engineers after the course who would like to contribute further for the design of machine foundations.
- The course is designed as a process of learning together.
WHO SHOULD ATTEND?
This course will be useful for following:
- Practicing Structural Consultants
- Senior Structural Engineers in the company
- Junior Structural Engineers in the company
- Owner’s consultants
- Proof checking consultants
- Research scholars, Academicians
- Post Graduate students in Structural Engineering
- Civil engineering students who are interested in Structural Engineering.
METHODOLOGY
The entire course is designed in the ONLINE mode.
- The course will spread over ~four weeks with approximate 24+ contact hours.
- During the program, the interaction can be done with faculty and the participants using WhatsApp.
- Fundamentals and the concepts will be demonstrated through study models in the software.
- The online sessions will be conducted using ZOOM software.
COURSE SCHEDULE
| Start Date | 25-JAN-2024 |
| End Date | 20-FEB-2024 |
| Total contact hours | 24+ (Sessions will be arranged on Monday to Friday from 8:30 PM to 10:00 PM IST.) |
| Details of each session | Please download brochure of the course for details of each session. |
FEES FOR THE COURSE**
| For participant from India | Cost per participant shall be 9800 INR (inclusive of 18% GST). |
| For students** pursuing Post graduation or Graduation from India | Cost per participant shall be 7800 INR (inclusive of 18% GST). |
| For participant outside from India | Cost per participant shall be 145 USD. |
**Discount offered:
- To avail discounted fess for student, the participant shall have official email address of the institute. Please connect with us at email address for more details: earthquake@sqveconsultants.com
- For continuous learner: If you have attended earlier one course of SQVe Consultants than 5% of discount will be offered. For prior two courses, 10% of discount will be offered. For three or more prior courses, 15% of discount will be offered. To avail the discount, please connect with us through the above-mentioned email address. We will arrange to send an invoice considering the discount for online payment.
- Group participation from a company or institute is encouraged to get the discounts on this course. For more details, pl contact us at the above-mentioned email address.
HOW TO REGISTER FOR THE COURSE?
Please click on the following button “Register Now” and you will be directed to the payment page. Your registration will be confirmed after receipt of the payment at portal.
Kindly note that there are limited seats.
Important notes:
- For any payment related queries, please contact us at email address: earthquake@sqveconsultants.com
- Applicable discount is not automated at online portal. For availing the same, please connect with us through the above mentioned email address.
- Above Payment gateway is configured ONLY for Indian participants. Interested foreign engineers can contact us at the email address : earthquake@sqveconsultants.com. An invoice will be shared through PayPal for online payment.
Feedback of the few participants from the previous online courses:
Shefali Thakkar
STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.
Ravichandra
STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.
Praveen Vasishth
STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.
Tarnpreet Singh Gill
The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.
Shreyas Barad
STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.
Akash Solanki
STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.
Rajen Dharia
On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.
Dhirender Singh Bisht
I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.
Sujata Gupta
It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.
RATHISH V R
I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!
Tanuja Singh
STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.
Your any queries/ doubts related to the course may be addressed to the email address: earthquake@sqveconsultants.com
Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW
REC-STR-001: Access recording of online courses | Get access to recording of earlier online courses related to wind engineering, earthquake resistant design, design of steel structures, applications in software ETABS & STAAD.Pro. There are total 98 sessions and 140+ contact hours. Link for more details: https://academy.sqveconsultants.com/rec-str-001
REC-STR-004 : Access recording of online courses | Design of Steel structures Get access to recording of earlier online courses related to design of steel structures which include important discussions related to design standards such as IS 800:2007, NBC 2016, AISC 360-22, AISC 341-16, EUROCODE-3 along with software applications in STAAD Pro & RAM connection. There are total 57 sessions with 85+ contact hours. Link for more details: https://academy.sqveconsultants.com/rec-str-004
Join YouTube channel of SQVe Academy | In return, you will get access to all member-only videos and the other perks at YouTube. There is nominal monthly subscription fees which can be cancelled at any time.
Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few
You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join
Purchase E-books by Er. J. D. Buch
Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/
Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (11.7K + subscibers):
Link: https://youtube.com/c/StructuralEngineering
Join telegram group for technical discussion related to structural engineering (8K + members):
Link: https://t.me/structuralengineering1
Register to receive updates from SQVe through email: