INTRODUCTION
Pre-engineered steel building (PEB) offers cost optimisation over the conventional sizes of the structural members (non-tapered). However, as the structure becomes relatively slender, more precautions are to be taken in analysis and design of the structure for ensuring stability. For the stability of slender steel structures as well as for the optimisation, it is extremely important to understand the fundamentals of flexure buckling, lateral torsional buckling, interaction between different structural elements for transfer of load, etc.
In view of the above, we have designed a unique online course for design of PEB structure for warehouse, titled as STEEL-STR-007 – Design of PEB steel structures as per IS 800:2007| Warehouse | STAAD Pro | RAM connection | RCDC. In the present course, only warehouse is considered so that we can have more focused discussions related to fundamentals for design of the steel structure, as mentioned above. In the upcoming online courses, other functional requirements, such as heavy crane, mezzanine floor, etc. will be considered. The course will commence from 28-MAR-24.
We will start the course with basic understanding of structural behaviour and stability concepts for shed type of structure. Following shows highlights of the course:
- The important limit states such as flexure buckling, lateral torsional buckling, local buckling, etc. will be explained through finite element modelling of the individual members.
- Interaction between different structural elements such as column, rafter, purlin, sag rod, girts, sheeting, flange bracing, etc. will be explained in detail.
- Case study of two warehouse structures (with and without central column), covering the following steps:
- Preparing structural system, geometry generation, wind and seismic load calculations, load applications in the software, load combinations, performing analysis of structure, defining design parameters for different structural elements, design of typical members, connection design of the structure using RAM connection software, foundation design using RCDC software, etc.
- Design of the structures will be performed using IS 800 : 2007. Wind load calculations as per IS 875 (Part 3) : 2015 and seismic load calculations as per IS 1893 (Part 1):2016 & NBC 2016
- Analysis and design will be performed using software STAAD Pro, RAM connection and RCDC.
- Manual calculations will be performed for checking the different capacity calculations for taper member with slender web, etc.
(For more details, please refer the detailed schedule, mentioned towards end of the document.)
The entire course will be extremely useful for preparation of in-house check-list, working procedure, Do’s and Don’ts, etc. for different types of analysis for buildings.
WHAT IS UNIQUE ABOUT THIS COURSE?
- The course is designed by the experienced engineer (Mr. Bhavin Shah) who have more than two decades of experience in the field of structural engineering.
- The entire course is designed from the practical aspects which can be readily used in the real projects.
- The course is designed to have an interactive mode so that the problems / doubts of the participants can be addressed effectively.
- A WhatsApp group will be created for quick communication between the participants and the faculty. The participants will be able to share the discussion points, doubts, queries, etc. in the group. The details in the group will be collated for further discussion in the next sessions.
- All the sessions will be recorded and recording of each session will be shared within few hours. If someone miss out the live session then he/she can go through the recording before attending the next session. The participants can share the doubts/queries in the WhatsApp group, after going through the recording which will be addressed in the next session.
- Two STAAD models of PEB warehouses will be discussed from geometry generation to the foundation design.
- Participants will be encouraged to take up another geometry of the PEB structure and develop the model, perform analysis and design as we progress in the course. Findings or queries from the same will be discussed during the sessions.
- Recording will be available with all the participants for 180 days.
- Certificate will be issued on successful completion of the online course (minimum 80% attendance is required.).
- The course is designed as a process of learning together.
WHO SHOULD ATTEND?
This course will be useful for following:
- Practicing Structural Consultants
- PEB design engineers
- Owner’s consultant
- Proof checking consultants
- Senior Structural Engineers in the company
- Junior Structural Engineers in the company
- Government representatives who are involved
- Civil/structural engineers who do not have prior exposure of steel structures and want to learn from first fundamental
- Post Graduate students in Structural Engineering
- Civil engineering students who are interested in Structural Engineering
COURSE FACULTY
Mr. Bhavin Shah (Founder & CEO, SQVe Consultants) is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.
METHODOLOGY
- The entire course is designed in the ONLINE mode.
- The course will have approximate 27+ contact hours.
- During nearly one month of a time, the interaction can be done with faculty and the participants using WhatsApp.
- Participants will be given the exercises to further strengthen their learning.
- The participants will be encouraged to share their real project problems during the course. We will discuss possible solutions for the same.
- Participants will have ample opportunities for raising their doubts / queries related to the subject.
- The online sessions will be conducted using ZOOM software.
- The course is designed as a process of learning together.
COURSE SCHEDULE
| Start Date | 28-MAR-2024 |
| End Date | 22-APR-2024 |
| Total contact hours | 27+ (Sessions will be arranged from Monday to Friday from 8:30 PM to 10:00 PM IST.) ## |
| Details of each session | Please download brochure of the course for details of each session. |
All the sessions will be recorded and recording of each session along with the course material will be shared within few hours at our online portal. If one has opted for self paced course or someone miss out the live session then he/she can go through the recording before attending the next session. The participants can share the queries in the WhatsApp group, after going through the recording which will be addressed in the next session. The recordings and course material can be accessed for 180 days.
FEES FOR THE COURSE**
| For participant from India | Cost per participant shall be 11500 INR (inclusive of 18% GST). |
| For students pursuing Post graduation or Graduation from India | Cost per participant shall be 9200 INR (inclusive of 18% GST). |
| For participant outside from India | Cost per participant shall be 165 USD. |
**Discount offered:
- To avail discounted fees for student, the participant shall have official email address of the institute. Please connect with us at email address for more details: steel@sqveconsultants.com
- For continuous learner: If you have attended earlier one course of SQVe Consultants than 5% of discount will be offered. For prior two courses, 10% of discount will be offered. For three or more prior courses, 15% of discount will be offered. To avail the discount, please connect with us through the above-mentioned email address. We will arrange to send an invoice considering the discount for online payment.
- Group participation from a company or institute is encouraged to get the discounts on this course. For more details, pl contact us at the above-mentioned email address.
HOW TO REGISTER FOR THE COURSE?
Please click on the following button “Register Now” and you will be directed to the payment page. Your registration will be confirmed after receipt of the payment at portal.
Kindly note that there are limited seats.
Important notes:
- For any payment related queries, please contact us at email address: steel@sqveconsultants.com
- Applicable discount is not automated at online portal. For availing the same, please connect with us through the above mentioned email address.
- Above Payment gateway is configured ONLY for Indian participants. Interested foreign engineers can contact us at the email address : steel@sqveconsultants.com. An invoice will be shared through PayPal for online payment.
Feedback of the few participants from the previous online courses:
Akash Solanki
STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.
Sujata Gupta
It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.
Shefali Thakkar
STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.
Rajen Dharia
On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.
Shreyas Barad
STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.
Praveen Vasishth
STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.
Tanuja Singh
STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.
Ravichandra
STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.
Dhirender Singh Bisht
I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.
Tarnpreet Singh Gill
The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.
RATHISH V R
I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!
Your any queries/ doubts related to the course may be addressed to the email address: earthquake@sqveconsultants.com
Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW
REC-STR-001: Access recording of online courses | Get access to recording of earlier online courses related to wind engineering, earthquake resistant design, design of steel structures, applications in software ETABS & STAAD.Pro. There are total 98 sessions and 140+ contact hours. Link for more details: https://academy.sqveconsultants.com/rec-str-001
REC-STR-004 : Access recording of online courses | Design of Steel structures Get access to recording of earlier online courses related to design of steel structures which include important discussions related to design standards such as IS 800:2007, NBC 2016, AISC 360-22, AISC 341-16, EUROCODE-3 along with software applications in STAAD Pro & RAM connection. There are total 57 sessions with 85+ contact hours. Link for more details: https://academy.sqveconsultants.com/rec-str-004
Join YouTube channel of SQVe Academy | In return, you will get access to all member-only videos and the other perks at YouTube. There is nominal monthly subscription fees which can be cancelled at any time.
Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few
You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join
Purchase E-books by Er. J. D. Buch
Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/
Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (11.7K + subscibers):
Link: https://youtube.com/c/StructuralEngineering
Join telegram group for technical discussion related to structural engineering (8K + members):
Link: https://t.me/structuralengineering1
Register to receive updates from SQVe through email: