Categories
Civil Engineering Earthquake Engineering Steel structure Structural Engneering

Session 45 : Earthquake resistant design and detailing of steel structures

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

For steel structures, earthquake resistant design related specifications / details are mentioned in section 12 of IS 800 : 2007. Also, there are few modifications made in NBC 2016 with respect to earthquake resistant design provisions for steel structures. 

Recently, BIS has published a draft code for earthquake resistant design and detailing of steel buildings, similar to IS 13920 for RCC structures. 

Title of the document : Earthquake Resistant Design and Detailing of Steel Buildings 

Last date for comments:  23-JUNE-2022

Link for downloading the document:  https://www.services.bis.gov.in/php/BIS_2.0/dgdashboard/draft/darftdetailcomm/210/3/CED39

It is going to be very important standard for earthquake resistant design and detailing of steel structures.

We had one of the live discussion on the same topic on 20-MAY-22. Recording of the session may be seen at the following link: https://youtu.be/Qrlrwjl8stM

In the upcoming live discussion, Er. Rudra Nevatia will share his critical review for the draft document.

 In its present form, the code will make many of the steel buildings unviable cost wise. It will help if all stakeholders – End users, consultants, manufacturers – could review the draft and offer their comments before the code is finalized. The code is open for comments. till 23th June, 2022.

In the following registration form, you may share the specific discussion points which may be addressed during the session. The same would help us to structure the discussion.

Comments by Er. Rudra Nevatia can be downloaded from below link:

For inquiries related to sponsoring the events may be sent to email address: sponsor@sqveconsultants.com

Schedule

DATE : 15-JUN-22

TIME : 8:30 PM IST TO 9:45 PM IST

Brief about Expert

Er. Rudra Nevatia – Consulting Engineer

He has 50+ years of overall experience. He completed graduation in Civil Engineering from IIT, Bombay. He worked for more than 30+ years as a consulting engineer Stress Analysis, Design & Proof Checking of Structures & Equipment.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

Feedback of few participants for previous online courses"

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Categories
Civil Engineering Design of RCC structures Structural Engneering

Session 44 : Concrete technology for Structural Engineers

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Understanding of concrete technology is vital to achieve desired strength of concrete, durability etc. It is one of the important parameter related to life of the structure. We have received few queries from structural engineers related to concrete technology:

  • Step by step approach for concrete mix design
  • What are important points to be taken care while review of the concrete mix design?
  • What are the impacts on concrete mix design due to change of aggregates / type of cement, etc?
  • Can we add admixtures at site which are not considered in the concrete mix design?
  • What are QA/QC control to be followed at site?
  • And many more…

In view of the above, we are planning next live discussion on the subject of concrete technology for structural engineers. Dr. Yogini Deshpande will join us in the live discussion.

In the following registration form, you may share the specific doubts/questions related to the topic which may be addressed during the session.

For inquiries related to sponsoring the events may be sent to email address: sponsor@sqveconsultants.com

Schedule

DATE : 01-JUN-2022

TIME : 4:00 PM TO 5:00 PM IST

Brief about Expert

Dr. Yogini Deshpande

 Ph.D, (USA), FIE, FICI, MACI,

Technical Director, Renuka Consultants,

 Chair Professor, College of Engineering, O P Jindal University, Board Of Direction, India Chapter of American Concrete Institute

Dr. Yogini Deshpande currently is the Technical Director of Renuka Consultants and holds a PhD in Civil Engineering from Purdue University. She has been recently appointed as Chair Professor, Civil Engineering Department in O P Jindal University. She holds a Bachelors Degree in Civil Engineering and a Master’s Degree in Geotechnical Engineering from Mumbai University. Prior to pursuing a PhD she worked as a Research Fellow at the Atomic Energy Regulatory Board, Department of Defense, India.

She is on the Board of Direction of India Chapter of American Concrete Institute, Member of ACI -130 Committee for Sustainability in Concrete, Member of ACI – 546 Committee for Repair of Concrete.

Specialties: Infrastructure systems, Sustainable Construction, Civil Engineering Materials, Material Health Monitoring, Repair and Rehabilitation, Concrete, Forensic Analysis of Structures, Structural Audit, Non-Destructive Testing, Foundation Analysis, Geotechnical Engineering, Offshore Investigations, Ground Improvement, Soil Investigation, Construction Material Testing, Quality Control, Quality Assurance, Training and Technology Transfer expert, Educator.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

Feedback of few participants for previous online courses"

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Categories
Civil Engineering Structural Engneering

Session 42 : UHPC – An introduction – Material, Design and Application

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Ultra High Performance Concrete (UHPC) is a cementitious composite material composed of an optimized gradation of granular constituents, with an ultra-low water-cement content, and a high percentage of discontinuous internal fiber reinforcement. UHPC is densely packed using micro and sometime nano size material ingredients, which imparts UHPC its two signature properties – ultra-high mechanical and ultra-high durability. The result is structural sections that are over 50 percent lighter than concrete sections, negligible reinforcement, and a service life that is devoid of any structural maintenance or repair.

The material finds applications ranging from bridge and building structural elements to protective overlays on bridge decks, industrial slabs, building facades, mechanical device bedding and foundations, interior panels, tiles, outdoor furniture, and blast resistant structures amongst others.

When we think GREEN and SUSTAINABILITY, UHPC stands out above and beyond its peers – both concrete and steel. UHPC has positioned itself strategically between  Concrete and Structural Steel and has the ability to not only be used independently but also a a composite with both these materials.

We are planning to have series of discussions on the important subject. In the initial talk, we will attempt to cover introduction of UHPC (Material, Design and Application).

In the upcoming live technical discussion, Dr. Satish Jain will join us for interesting discussion related to UHPC.

In the following registration form, you may share the specific doubts/questions related to the topic which may be addressed during the session.

The event is sponsored by Sanghi Cement. For inquiries related to sponsoring the events may be sent to email address: sponsor@sqveconsultants.com

Schedule

DATE : 28-APR-22

TIME : 4:00 PM IST TO 5:30 PM IST

Brief about Expert

Dr. Satish Jain, Ph.D. PE, SE (USA)
Managing Director, UHPC India Pvt. Ltd.

Experience: 22 Years

2000 to 2009 – USA

2009 to Present – India

Licensed Structural Engineer both in the USA and India. Apart from UHPC India Pvt. Ltd, he also leads Satish Jain Consulting Engineers Pvt. Ltd. Designed challenging structures across both India and the USA.

Education:

Ph.D in Structural Engineering in UHPC, Iowa State University, USA

M.S in Structural Engineering, Iowa State University, USA

B.Tech in Civil Engineering, NIT (REC) Calicut, India

Expertise:

  1. Ultra High Performance Concrete – Material Manufacturing, Structural Design and Execution.
  2. Performance Based Structural Design
  3. Design and Execution of Pretensioned, Bonded and Unbonded Post-Tensioned structures.
  4. Structural Design of Concrete and Steel structures including high-rise building

Current Initiative

Dr. Jain’s current initiative involves promoting the use of UHPC in India through design, application development, material manufacturing, training, research and project management services.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

Feedback of few participants for previous online courses"

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Categories
News & Events Structural Engneering

Live Technical Discussion Series -Links of previous sessions

One of the vertical of SQVe Consultants is Knowledge Sharing! In the vertical, we started one year back live technical discussion with a topic “design of gravity columns as per IS 13920:2016” and we received quit encouraging feedback in the first session.

Our aim is to arrange the live technical discussion on the areas related to engineering where in industry is facing practical difficulties. We had very interesting live technical discussions so far on the important subjects like Gravity column, Stiffness modifiers as per IS 1893 & IS 16700, Irregularities as per IS 1893, Time period calculation as per IS 1893, Recent amendments to IS 1893 & IS 13920, Interface between geotechnical and structural engineer, Wind force estimation for low rise buildings & tall buildings as per IS 875, Pile foundations, Quality assurance in structural engineering firms, structural audit, etc. We have received quite inspiring response and we are receiving number of requests for arranging such talks on the different topics. With this there are many topics in pipeline!

Thank you all for supporting the initiative! Looking forward for similar kind of support in future as well.

Please suggest in the comment box areas for which such live technical discussions may be arranged.

As of today, we arranged the live discussion on 41 interesting topics. Link of all our previous sessions are mentioned below:

Please download the document which include link of all the previous live technical discussions.

Opportunity for sponsorship is available. You may contact us at email address: sponsor@sqveconsultants.com

Categories
Civil Engineering Reinforcement Structural Engneering structural steel

Session 41 : Different types of structural steel and reinforcement – Overview

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Material selection is one of the important area in the construction projects to achieve goals of engineering such as, safety, cost optimisation, durability, earthquake resistant design, fire resistance, etc. There are multiple questions while selection of the materials.

  • What are the options available for grades of structural steel, i.e Fe250, Fe350, etc.?
  • What is the appropriate grade for structural steel? How to select the same?
  • What are the options available for reinforcement grade, i.e Fe 500, Fe 550, Fe 600…, etc? How to select the appropriate grade?
  • How to select the reinforcement with appropriate coating?
  • What are the selection criteria from point of view of corrosion and welding?
  • What are the options available to increase the fire resistance of steel structures?
  • Many more…

We are planning to have series of discussions on the important subject. In the initial talk, we will attempt to give overview about different types of reinforcement & structural steel.

In the upcoming live technical discussion, Dr. Jayanta Kumar Saha will join us for interesting discussion related to different types of steel and reinforcement.

In the following registration form, you may share the specific doubts/questions related to the topic which may be addressed during the session.

The event is sponsored by Sanghi Cement.

Opportunities for sponsorship is available for live technical discussion series. For inquiries, you may contact us at : sponsor@sqveconsultants.com

Schedule

DATE : 31-MAR-22

TIME : 4:00 PM IST

Brief about Expert

Dr. Jayanta Kumar Saha have overall 38 years of experience. He worked with INSDAG since 1999 & had pursued sponsored/technical projects on steel metallurgical engineering, conducting skill development programmes for professionals and Engineering students under academic – industry interaction along with networking with member/stake holders.

He also worked previously with leading organisations like Hindustan Aeronautics Ltd, CSIR: Central Mechanical Engineering Research Institute, and Philips India Ltd. Obtained B.E in Metallurgical & Materials Engg from IIEST, Shibpur, M.Tech in Production Engg from IIT, Madras & Ph.D in Met & Matl Engg from Jadavpur University.

Recipient of National Corrosion Awareness award from SSPC, Excellence in Corrosion Science &Technology from NACE International and Mascot award from ECSI, IISc Bangalore. Published 20 Guidebooks from present organisations on structural steel, welding / fabrication, Corrosion & Fire protections. Representing Bureau of Indian standards in MTDC, MTD4, MTD24 & CED54 committees & CII Corrosion Management council. Served as distinguished vising professor under AICTE-INAE Industry-Academic schme for IIEST , Shibpur & Jadavpur University. Had been to overseas to carry out collaborative applied research work on steel structure protections from corrosion & fire. Carrying out sponsored project works for steel majors on atmospheric corrosion protection & passive fire protections. Currently delivering technical talks on Steel Essentials for Mechanical & Civil Engg students as guest faculty for several private engineering colleges. Looking after quality management system in the capacity of Lead Auditor (ISO 9001 ) & IT facilities of the organisation.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

Feedback of few participants for previous online courses"

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Categories
Retrofitting Structural Audit Structural Engneering

Session 40 : Structural Audit

Live Technical Discussion Series

For structural safety, periodic assessment is one of the vital tool. As per NBC 2016, the periodic assessment for the structures (as covered in para no. 12.2.5.1) to be carried out between 3 to 5 years but in any case not more than 5 years. For more details, may refer para no. 14.4 (periodic occupancy renewal) of the document. Structural audit is one of the part of periodic assessment of structures.

In next live technical discussion, we will talk about general questions related to structural audit:

  • What is structural audit?
  • Objectives of Structural audit..
  • How structural audit is carried out?
  • When to call for a structural audit?
  • What are the data collected during structural audit?
  • What are major areas to be observed through visual inspection?
  • Are there are any tests carried out in the process of structural audit?
  • What would be output of the structural audit?
  • What are the next actions after structural audit?
  • and many more…

Opportunity of sponsoring the event is available. Inquiries may be sent to sponsor@sqveconsultants.com

EXPERT TEAM

Er. Dr. Abhay Gupta has obtained his BE(Civil) in 1981 & subsequently ME(Structures) from SGSITS Indore; and Ph.D. from University of Roorkee, Roorkee (now IIT Roorkee) in the area of “Aerodynamic Interference in Tall Rectangular Buildings: Wind Tunnel Studies” in 1996. He has more than 35 years of experience in the field of Civil Engineering construction and Structural design. Dr. Abhay Gupta is one of the Directors of Skeleton Consultants Pvt. Ltd. Noida. Dr Gupta has also worked as Principal consultant for establishment of Wind tunnel facility at Guna MP.

Er. Aman Deep Garg is Managing Director, leading a consulting firm “Creative Design Consultants and Engineers Pvt Ltd” in the field of Structural design and Project Management of constructional projects. Skilled in Planning, Design, Management, and Structural Retrofitting design besides Structural Audits and NDTs. Strong design concepts and focused in Earthquake Resistant Design of Structures learned at NIT Kurukshetra and IIT Roorkee. Also working as Trainer for construction industry.

SCHEDULE

DATE : 18-MAR-22

TIME : 5:30 PM IST

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. Please click on the below button “Register Now” wherein you may share the questions in the advance. The same will help us to structure the discussion.

You will receive an email with a link for participation.

Dr. Ashok Jain & Mr. Bhavin Shah will conduct the online course EQ-STR-002 : “Learn concepts of earthquake resistant design” . The course will commence from 17-MAR-22. For more details, please CLICK HERE.

Feedback of few participants for previous online courses

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Categories
Civil Engineering Geotechnical Engineering Structural Engneering

Session 39 : Scope of Geotechnical Investigation

Live Technical Discussion Series

(Soil Structure Interaction…)

Interface between geotechnical engineers and structural engineers is of paramount importance for stability of the structure as well as for the cost optimisation. There are gap areas in the industry with respect to the important interface area. One of the gap area is pertaining to define appropriate scope of geotechnical investigation. It may be ideal that the scope of geotechnical investigation is decided jointly by geotechnical consultant and structural consultant. However, in the typical project cycle, structural engineer may decide scope of the geotechnical investigation in isolation as the geotechnical consultant may not be on board at that time.

In the upcoming live technical discussion, we will arrange discussion related to scope of geotechnical investigation. Following shows few of the questions related to scope of geotechnical investigation:

  • How to decide number of bore holes?
  • How to decide depth of boreholes?
  • What are the different types of tests to be included in geotechnical investigation?
  • SPT vs CPT…whether both tests are required.
  • How to decide number of tests per borehole?
  • Input to be given by structural consultant for preparation of the report
  • Scope related to recommendation of foundation type
  • Scope of geotechnical investigation as per IS codes
  • and many more…

Opportunity of sponsoring the event is available. Inquiries may be sent to sponsor@sqveconsultants.com

EXPERT TEAM (mix of Geotechnical & Structural experts)

Mr. Umesh B. Rao – Consulting engineer

Dr. Jaykumar Shukla – Principal Engineer and Senior Consultant, Geo Dynamics

Mr. Shekhar Vaishampayan – Managing Director at Sub Surface Consultants Pvt Ltd

Mr. Olavo Carvalho – Consulting Civil Engineers at A. Olavo Carvalho

Mr. Sandip Deshpande – Director, RENUKA CONSULTANTS

Mr. Suhas Mujumdar – Director at ASI Consultants

Mr. Sorabh Gupta – Director, Cengrs Geotechnica Pvt. Ltd.

SCHEDULE

DATE : 11-MAR-22

TIME : 7:00 PM IST

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. Please click on the below button “Register Now” wherein you may share the questions in the advance. The same will help us to structure the discussion.

You will receive an email with a link for participation before couple of days of the event.

Dr. Ashok Jain & Mr. Bhavin Shah will conduct the online course EQ-STR-002 : “Learn concepts of earthquake resistant design” . The course will commence from 17-MAR-22. For more details, please CLICK HERE.

Feedback of few participants for previous online courses

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Categories
Civil Engineering Machine foundation Structural Engneering

Session 36 : Design of Machine Foundations (Part-1)-Bhavin Shah

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Design of machine foundation is one of the specialised area of structural engineering. Sound fundamentals of structural dynamics are required for design of the machine foundations. Also, effective interface is required with the equipment manufacturer and geotechnical consultant. The vibrations are to be restricted in terms of microns for safety of the equipment.

In the upcoming live technical discussion, Bhavin Shah will share his experiences related to design of machine foundation and will attempt to answer few of the questions received through the registration form.

The event is powered by Sanghi Cement.

Schedule

DATE : 31-JAN-22

TIME : 4:00 PM IST

Brief about Expert

Bhavin Shah (Founder & CEO, SQVe Consultants)

He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He started the journey as a structural engineer and got the opportunities for designing industrial structures of the diversified industries like, oil & gas, thermal power plants, renewable energy, manufacturing industries, etc. within India as well as outside India. Worked in different stages of engineering like, prefeasibility studies, basic engineering, detailed engineering, retrofitting of the existing structures, involved in forensic investigation for identifying root cause for collapse of the structures, etc.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

An interesting online course related to design of steel structures,  STEEL-STR-001 (Decode IS 800:2007 along with software) has started from 25-JAN-22. You may still join the course. Click here for registration.

Feedback of few participants for STEEL-STR-001:

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Categories
Civil Engineering Engineering Structural Engneering

Session 35 : Experience of structural design – Er. Umesh B. Rao

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

In the upcoming live technical discussion, Er. Umesh B. Rao will join us . He has more than 50+ years of experience in the field of structural engineering. In the session, he will be sharing his experiences related to structural design of more than five decades. Also, he may respond to the doubts/queries received through the registration form. In the registration form, you may share any question related to the field of structural engineering.

Schedule

DATE : 28-JAN-22

TIME : 7:00 PM IST

Brief about Expert

UMESH B. RAO ( CONSULTING ENGINEER)

He obtained B.E. (CIVIL) degree from V.J.T.I., Bombay University, Obtained M.Tech. (Marine Structures) degree from Mysore University. After B.E., he worked with Builders Associates, Bombay – an Architectural and Structural Engineering Firm until June,1970. He designed 19, 21, & 27 storied buildings, RCC frame structures, in 1969. Since Marine Structure Post Graduate Course was offered for the first time in India, he then joined K.R.E.C., Surathkal, for M.Tech. (Marine Structure) Course. Worked with Tata Consulting Engineers at Bombay and Bangalore between 1972 & 1980.During the tenure with TCE, he worked on different type of projects such as Nuclear Power Plants, Thermal Power Plants, Hydro electric Power plants, Slipway for Ship building, Paper Plants, Sewage Treatment Plants, Heavy Industries, Department of Space project, etc. for projects in India and abroad.

As a team member, he was involved in Hydraulic Model Studies to study the effect of inlet velocity on pisiculture and inlet of sediments due to littoral drift and effect of rise in temperature of hot water outlet (Seal Well) on marine environment. Designed Morning Glory (Intake Structure in RCC) located 500M away from shore. Dewatered in the sea to place cast-in-situ concrete in the sea. Designed on shore pump house, CW tunnels, etc. As a team member, used steel piles for CW system in strait and used anode and cathode protection system for protection of steel. As a team member, designed Slipway which had loading of 69T per Sqm on the slab.As a team member, designed chip silos, paper machine beams which are very sensitive to differential deflections. Conducted Optimization study of Thermal Power Plant Circulatory Water System, tunnel, pump house and implemented. Started Umesh B Rao and Co at Bangalore – Consulting Civil Engineering firm in 1980. Has been involved in designing different types of projects: Power Plants, Infrastructure Projects such Mass Rapid Transportation, Water treatment plants, Sewage treatment plants, Industrial and Aquaculture Projects, Software Parks, Educational Institutions, etc. Trained in Non-Destructive Testing of Concrete Structure in 1975 at CRI Designed using steel concrete composite material for construction of Distilleries in 1982. Using nailing of old concrete and new concrete increase thickness of slab to take higher load in 1982. Using timber, steel and concrete as composite material designed slab in 1996. He designed grade slab to carry heavy machineries. Designed 15m tall Reinforced Earth Retaining Structure in 1997. Using pre-cast concrete, cast-in situ concrete and structural steel designed composite multistoried structure in 2000. He designed multistoried building having 30m X 30m grid spacing of columns with waffle slab to suit interior design. Has been on Expert Committee of Department of Space, Bangalore Municipal Corporation, as well as Royal Government of Bhutan.

Has been founder member of Association Of Consulting Civil Engineers (ACCE) and Institute For Research, Development & Training of Construction Trades & Management (INSTRUCT). He has been involved in training civil engineering fraternity through various programs. He has delivered lectures and presentations to Civil Engineering Students, Staff members of Engineering Colleges and Universities. He is well-known for innovative concepts, pioneering technology usage and holistic approach to engineering and construction. Extensive experience in a wide variety of successful projects across several domain areas. He has been conferred “GAURAV AWARD” by ACCE in 2021 for Significant Contribution to Civil Engineering Consultancy in Bangalore, “MEMBER EMIRETIUS” by INSTRUCT in the year 2013. Honoured as “EMINENT ENGINEER” in Bangalore by Civil Aid Techno clinic Pvt Ltd. in the year 2012 “GLOBALMAN AWARD” in Abudhabi, U.A.E in the year 2004 “NATIONAL AWARD” FOR PROFESSIONALS” on Structural Steel Design and Construction – 2004 in Mumbai

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

An interesting online course related to design of steel structures,  STEEL-STR-001 (Decode IS 800:2007 along with software) has started from 25-JAN-22. You may still join the course. Click here for registration.

Feedback of few participants for STEEL-STR-001:

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Categories
Civil Engineering Earthquake Engineering Structural Engneering

Session 34 : Critical Review of IS 1893 (Part 1) : 2016 – Dr. Ashok K. Jain

Introduction

Centuries ago, a large number of astonishing structures such as Kutub Minar, Taj Mahal and so many incredible palaces and temples were built in stone masonry in various parts of the country. Some of these temples have very tall shikhars with amazing carvings. They have so many delicate columns and non-structural elements. They are standing even today without any damage due to past earthquakes. However, is it possible to build similar stone masonry structures today? NO. IS 1893 (Part 1) will not let you. It has banned such structures explicitly in seismic zone III, IV and V.

The question arises who is wrong? Our ancestors or the modern day IS 1893 (Part 1) code? (Extract from paper of Dr. Ashok K. Jain)

The original paper was presented by Dr. Ashok K. Jain in the meeting of IAStructE on 11th May, 2017. Since then, a number of practicing engineers have made requests to discuss the various issues in more detail. In 2020, BIS has issued amendment no. 2 which is quite exhaustive. Recently, he has modified the document based on request of the practicing engineers.

In the upcoming live technical discussion, Dr. Ashok K. Jain will share his critical review about IS 1893 (Part 1) : 2016.

About Speaker

Dr. Ashok K. Jain is currently a structural consultant having over 40 years of experience. Formerly, a Professor of Civil Engineering at the Indian Institute of Technology Roorkee, Roorkee. Dr. Jain received his Ph.D. in Civil Engineering from the University of Michigan, Ann Arbor, MI in 1978. He received gold and silver medals in B.E. (Civil Engineering) and M.E. (Structural Engineering) at the University of Roorkee, Roorkee. He is well known for imparting latest knowledge on each subject/topic through latest analytic tools such as MATLAB, MS Excel, SAP2000, and ETABS.

Dr. Jain has published over 50 refereed journal papers and over 60 conference papers on various topics. He has authored five text books:

  • Dynamics of Structures with MATLAB Applications, Published by Pearson (2016)
  • Reinforced Concrete – Limit State Design now in its 7th edition (2012) – This book has the distinction of being the first book on the subject published in 1983 in India and enjoys excellent reputation till date.
  • Advanced Structural Engineering with Finite Element Method, 3rd edition (2015)
  • Strength of Materials and Structural Analysis, 2nd edition (2008)
  • Fortran programming, second edition (1990) – now discontinued

He has delivered keynote addresses in many conferences and conducted short specialist courses on Reinforced Concrete, water retaining structures, ductile detailing of structures, dynamics of structures and earthquake resistant design.

Schedule

DATE : 21-JAN-22

TIME : 7:00 PM IST

How to register for the event?

Registration to the event is FREE. You may register by clicking on following button. In the registration form, you will be able to share the specific doubts/queries related to IS 1893 (Part 1) : 2016 which you would like to get it addressed during the session.

After registration, you will receive a link for participation in the session.

STEEL-STR-001 : An online course related to design of steel structures will commence from 25-JAN-22. For more details, please visit the link : https://sqveconsultants.com/steel-str-001