INTRODUCTION
Design of connections for steel structures is one of the grey area in the industry. The practice varies from consultant to consultant to a great extent and there are number of ambiguities in the connection design. In India, IS 800:2007 was published before ~15 years and section 10 is added for the connection design. In absence of the detailed practical handbook, there are number of doubts/ambiguities related to the connection design.
After a grand success of our workshop STEEL-STR-001* (Decode IS 800:2007 along with software), we are glad to launch a unique workshop STEEL-STR-002 related to design of connections for steel structures.
For design of connections, a mix approach of manual calculations/ in house developed spreadsheets / software is preferred. The area of connection design is comprehensively covered in EUROCODE 3. Hence, in the workshop, we will understand the fundamentals & concepts for the connection design based on EUROCODE-3. We will also discuss the connection design as per AISC 360-16 in one of the session. Thereafter, we will take up the connection design as per IS 800:2007.
Hands-on training is planned for all different types of the connections on the software STAAD Pro RAM connection. The detailed schedule is mentioned towards end of the document.
The workshop is arranged in association with Mahavir Traders.
*Interested engineers can purchase access to recordings of the previous workshop STEEL-STR-001. Please send a request at email address: steel@sqveconsultants.com
WHAT IS UNIQUE ABOUT THIS COURSE?
The course is designed by the experienced engineer (Mr. Bhavin Shah) who have more than two decades of experience in the field of structural engineering.
- The entire course is designed from the practical aspects which can be readily used in the real projects.
- The course is designed to have an interactive mode so that the problems / doubts of the participants can be addressed effectively.
- Mahavir Traders will provide training license of RAM connection to registered participants for the duration of the training.
- A WhatsApp group will be created for quick communication between the participants and the faculty members. The participants will be able to share the discussion points, doubts, queries, etc. in the group. The details in the group will be collated for further discussion in the next session.
- All the sessions will be recorded and recording of each session will be shared within few hours. If someone miss out the live session then he/she can go through the recording before attending the next session. The participants can share the doubts/queries in the WhatsApp group, after going through the recording which will be addressed in the next session.
- Recording will be available with all the participants for 180 days.
- Certificate for participation will be issued through Bentley Institute in association with Mahavir Traders on successful completion of the online course (minimum 80% of attendance is required).
- We will create a focused group of engineers after the course who would like to contribute in the area of the connection design for steel structures.
- The course is designed as a process of learning together.
WHO SHOULD ATTEND?
This course will be useful for following :
- Practicing Structural Consultants
- PEB design engineers
- Owner’s consultant
- Proof checking consultants
- Senior Structural Engineers in the company
- Junior Structural Engineers in the company
- Civil/structural engineers who do not have prior exposure of steel structures and want to learn from first fundamental
- Post Graduate students in Structural Engineering
- Civil engineering students who are interested in Structural Engineering.
COURSE FACULTY
Bhavin Shah – Founder & CEO, SQVe Consultants
He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.
METHODOLOGY
- The entire course is designed in the ONLINE mode.
- The course will spread over ~three weeks with approximate 23+ contact hours.
- During the program, the interaction can be done with faculty and the participants using WhatsApp.
- The course includes few tutorials wherein the participants will get hands on experience related to design of connections for steel structures.
- The online sessions will be conducted using ZOOM software.
- The course is designed as a process of learning together.
COURSE SCHEDULE
| Start Date | 3-OCT-2022 |
| End Date | 20-OCT-2022 |
| Total contact hours | 23+ (Sessions will be arranged on Monday to Saturday from 8:30 PM IST to 9:45 PM IST.) |
| Details of each session | Please download brochure for details of each session. |
FEES FOR THE COURSE**
| For participant from India | Cost per participant shall be 12500 INR (inclusive of 18% GST). |
| For participant from outside India | Cost per participant shall be 225 USD. |
**Discount offered:
- For continuous learner: If you have attended earlier one course of SQVe Consultants than 5% of discount will be offered. For prior two courses, 10% of discount will be offered. For three or more prior courses, 15% of discount will be offered. To avail the discount, please contact us at following email address. We will share unique & temporary coupon code for the same.
- Group participation from a company or institute is encouraged to get the discounts on this course. For more details, pl contact us at : steel@sqveconsultants.com
HOW TO REGISTER FOR THE COURSE?
Please click on the following button “Register Now” and you will be directed to the payment page. You will be directed to the payment page. Your registration will be confirmed after receipt of the payment at portal.
Kindly note that there are limited seats.
Important notes:
- For any payment related queries, please contact us at email address: steel@sqveconsultants.com
- Above Payment gateway is configured ONLY for Indian participants. Interested foreign engineers can contact us at the email address : steel@sqveconsultants.com. An invoice will be shared through PayPal for online payment.
Feedback of the few participants from the previous batch:
Shefali Thakkar
STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.
Ravichandra
STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.
RATHISH V R
I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!
Akash Solanki
STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.
Rajen Dharia
On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.
Tarnpreet Singh Gill
The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.
Shreyas Barad
STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.
Praveen Vasishth
STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.
Tanuja Singh
STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.
Dhirender Singh Bisht
I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.
Sujata Gupta
It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.
Your any queries/ doubts related to the course may be addressed to the email address : steel@sqveconsultants.com