Categories
Earthquake Engineering Earthquake resistant design Structural Engineering

Session 87 – IS 1893 (Part 4):2024

INTRODUCTION

SQVE STRUCTURAL SUMMIT

IS 1893 (Part 4):2024, titled “Criteria for Earthquake Resistant Design of Structures Part 4: Industrial Structures Including Stack-Like Structures,” is the second revision of this standard, published by the Bureau of Indian Standards (BIS) in 2024.

This standard provides guidelines for the seismic design and construction of industrial structures, including stack-like structures, to ensure their resilience during earthquakes.

Based on request of few engineers, we will discuss few of the important areas from the document:

  1. When to consider IS 1893 (Part 4): 2024 for design of the structure?
  2. What are the different categories considered in the document?
  3. Basic guidelines for modelling industrial structure
  4. Time period for industrial structures
  5. Effect of damping on the seismic force
  6. Simultaneous consideration of seismic loads from three directions
  7. Requirement of P-Delta analysis
  8. Is it required to perform nonlinear time-history analysis?
  9. Load combinations to be considered for design of the structure, etc.

We are going to discuss these important areas in the upcoming session of SQVe Structural Summit. Mr. Bhavin Shah (SQVe) will conduct the session.

Schedule

DATE: 22-FEB-25

TIME: 8:30PM to 10:00PM IST

HOW TO REGISTER ?

The session will be conducted using ZOOM software.

Registration is FREE. You will receive link for participation through email.

RCC-STR-003: Foundation Engineering (Part 1)

The course will provide a comprehensive understanding of the finite element analysis of foundations, focusing on design using SAFE and STAAD Foundation Advanced. Participants will gain insights into the comparative analysis of software-generated results against manual calculations, ensuring a robust understanding of foundation behavior. A key aspect of the course is the geotechnical-structural interface, emphasizing the importance of collaboration between geotechnical and structural engineers while also covering essential IS codes related to geotechnical engineering. The foundation design module will include hands-on exercises using SAFE as per IS 456:2000, with an option to explore STAAD Foundation Advanced as per ACI 318 upon request. Case studies will illustrate real-world applications, covering isolated foundations, combined foundations, octagonal foundations for tall vertical vessels in the oil and gas industry, foundations for cantilever retaining walls, transmission line towers, annular raft foundations for chimneys, and raft foundations for tall buildings. Additionally, the course will highlight ways to enhance the quality of geotechnical investigations, focusing on critical areas that can improve the accuracy and reliability of soil investigations.

For more details, you may visit link: https://sqveconsultants.com/rcc-str-003

You may download brochure of the course: Download now

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

You can purchase access to the recorded sessions. Please connect as at email address: steel @sqveconsultants.com for the same.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (17K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Categories
tall buildings

Session 64 – IS 16700 : 2023

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Recently, BIS has published revised code IS 16700 : 2023Criteria for structural safety of Tall Concrete Buildings. As mentioned in “FOREWARD” part of the document, the following changes have been incorporated in the document.

a) Systems with structural walls at core have been dropped. All structural wall systems should have well distributed walls;
b) The wind return period of wind for natural drift under wind conditions has been revised;
c) Requirements for maximum vertical acceleration of floors have been dropped;
d) Maximum horizontal acceleration requirement has been revised for residential buildings;
e) A new expression for estimating the approximate fundamental natural period of buildings over 50 m has been provided;
f) Load combination has been specified considering P-Δ effects;
g) An expression for interstorey drift stability coefficient θ has been introduced;
h) The minimum requirement for transverse reinforcement in structural walls has been revised; and
j) The procedure for approval of buildings that do not conform to the prescriptive requirements of this standard has been revised in Annex B.

We have received few requests for organizing the live discussion for the latest document. We will discuss few important clauses of the code during the session. More sessions on the subject may be organised as required from the group of engineers.

In the following registration form, you may share the specific discussion points. The same would help us to structure the discussion.

For inquiries related to sponsoring the events may be sent to email address: contact@sqveconsultants.com

Schedule

DATE : 4-DEC-23

TIME : 8:30PM TO 10:00PM IST

Brief about Expert

Bhavin Shah – Founder & CEO, SQVe Consultants

He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points related to IS 16700 : 2023 which may be discussed during the session. It would help us to structure the discussion.

An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

DYN-STR-001: Design of Machine Foundations

we are glad to launch a unique online course (DYN-STR-001) which addresses the step-by-step approach for the machine foundations. We will start with basics of structural dynamics like single degree of freedom, free vibration, forced vibration, damping, multi degree of freedom, resonance, etc. along with examples in the software. Thereafter, we will discuss about different types of machines, dynamic loads generated from the machines, soil dynamics, spring calculations for FEM analysis, etc. We will also address the requirements of design standards such as IS 2974 & ACI 351 3R 04. Finally, we will take up actual modelling in the software for block foundation supporting reciprocating machine, block foundation supporting centrifugal machine and table top foundation supporting centrifugal machine. Detailed dynamic analysis will be performed in the software STAAD Pro and the important do’s and don’ts will be highlighted for the software application.

The course will commence from 14-DEC-23.

Click here for more details.

Feedback of few participants for previous online courses"

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Categories
IS Code Steel structure Structural Engineering

Session 63 – IS 18168:2023

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

SQVe is probably a single platform wherein couple of live discussions related to draft standard for “earthquake resistant design and detailing of steel buildings” were organised in month of June, 2022. The earlier recorded sessions are available at our YouTube channel. Recently, BIS has published the standard IS 18168:2023. Following shows few of the major changes in the document:

  • The document to be referred when there is conflict with section 12 of IS 800:2007
  • The general concepts adopted in this standard for buildings are applicable also for other types of structures; in particular, provisions of this standard may be taken as a guide for design of components of industrial structures and steel bridges.
  • Provisions of this standard are applicable for SMRF, SCBF and EBF
  • Material may be used up to E350 (B0 or C) as per IS 2062
  • Table-2 is added for section classification
  • Additional load combinations are mentioned
  • Slenderness ratio of beam is limited in the region of plastic hinge formation
  •  The slenderness ratio of unbraced length of columns shall be less than 75.
  • Criteria defined for the bracing size
  • Requirement for column-beam strength ratio is identified.
  • Criteria defined for design of fixed column base and pinned column base
  • Design methodology included for shear link of EBF frame, etc.

In summary, there are significant changes as compared to the section 12 of IS 800:2007. In our upcoming live technical discussion, we will have quick overview of the document and will highlight major changes with reference to the current design practices. We will arrange few more sessions as per requirements of the engineers.

In the following registration form, you may share the specific discussion points. The same would help us to structure the discussion.

For inquiries related to sponsoring the events may be sent to email address: contact@sqveconsultants.com

Schedule

DATE : 13-SEP-23

TIME : 8:30 PM TO 10:00 PM IST

Brief about Expert

Bhavin Shah – Founder & CEO, SQVe Consultants

He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

DYN-STR-001: Design of Machine Foundations

we are glad to launch a unique online course (DYN-STR-001) which addresses the step-by-step approach for the machine foundations. We will start with basics of structural dynamics like single degree of freedom, free vibration, forced vibration, damping, multi degree of freedom, resonance, etc. along with examples in the software. Thereafter, we will discuss about different types of machines, dynamic loads generated from the machines, soil dynamics, spring calculations for FEM analysis, etc. We will also address the requirements of design standards such as IS 2974 & ACI 351 3R 04. Finally, we will take up actual modelling in the software for block foundation supporting reciprocating machine, block foundation supporting centrifugal machine and table top foundation supporting centrifugal machine. Detailed dynamic analysis will be performed in the software STAAD Pro and the important do’s and don’ts will be highlighted for the software application.

The course will commence from 21-SEP-23.

Click here for more details.

Feedback of few participants for previous online courses"

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Categories
Earthquake Engineering Structural Engineering

Session 62: Panel discussion on draft standards of IS 1893

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Thank you all for actively participating in the live technical discussions related to draft IS 1893 (Part 1) & IS 1893 (Part 2). If you have missed out the sessions, then you may go through the recordings at following link:

Session 60: Discussion on draft IS 1893 (Part 1)
Session 61: Discussion on Draft IS 1893 (Part 2)

Recently, BIS has published draft standard of IS 1893 (Part 1) and IS 1893 (Part 2).

Doc. No.Title
CED 39(22343)WCDraft Indian Standard Criteria for Earthquake Resistant Design of Structures Part 1 General Provisions [Seventh Revision of IS 1893 (Part 1)]      
CED 39(22345)WCDraft Indian Standard Criteria for earthquake resistant design of structures Part 2 Buildings [Seventh revision of IS 1893 (Part 1)]

Draft standard of IS 1893 (Part 1) contains general provisions on earthquake hazard applicable to all structures.

Draft standard of IS 1893 (Part 2) contains provisions specific to earthquake resistant design of buildings.

Links for downloading the documents:

https://www.services.bis.gov.in/tmp/WCCED21022345_26042023_1.pdf

https://www.services.bis.gov.in/tmp/WCCED21022343_26042023_2.pdf

There are significant changes proposed in the draft standards, few of the same are mentioned below:

IS 1893 (Part 1)

  • Earthquake zone map is revised
  • Design horizontal acceleration coefficients are specified for strength and serviceability
  • Design methodology included for Architectural Elements and Utilities (AEU)
  •  Categories of structures are included with requirement of different return period of earthquakes for strength and serviceability
  • Procedure included for site specific earthquake hazard
  • Performance expectation of the structure is detailed out.
  • Range of modulus of subgrade reaction is mentioned.
  • Soil stiffness calculations are added, etc.

IS 1893 (Part 2)

  • Criteria are added for masonry buildings and steel buildings
  • Response reduction factors are modified and renamed as Elastic force reduction factors
  • Provisions on torsion is updated
  • Structural plan density of the structural walls is varied with earthquake zone
  • For RCC buildings, stiffness modifiers have same values for strength and serviceability
  • Limits on lateral storey drift in building is mentioned with respect to seismic zone
  • Concept of torsional flexibility is added
  • Provisions added for buildings on sloping ground
  • Displacement calculations added for Architectural elements and utilities
  • Admissible structural systems in RC buildings for different earthquake zone is added.
  • Admissible structural systems in Steel buildings for different earthquake zone is added.
  • For steel buildings, for seismic zone 4, SMRF and EBF are suggested. For zone 5 & 6, only EBF is allowed, etc.

Last date for sending the comments to BIS is 25-Jun-2023.

As there are significant changes in the draft standards, we are planning to conduct the multiple sessions for the same. 3rd session is planned on 15-JUN-23.

Our aim is to highlight the practical difficulties which may arise if the draft documents are published as national standards without any changes. Following experts will join the session:

  • Dr. Ashok K. Jain –  Retd. Professor of Civil Engineering, I.I.T. Roorkee
  • Er. Rudra Nevatia – Consulting engineer
  • Er. Kamal Parekh – MD & CEO, Shri Sarjan Technocrats Pvt. Ltd
  • Er. Bhavin Shah – Founder & CEO, SQVe Consultants

Following are some of the topics which will be discussed during the session:

  • Comparison of design base shear between draft IS1893 & IS 1893 (Part 1):2016
  • EBF is the only allowed frame in seismic zone 5 & 6.
  • Comments on elastic response reduction factor (as per table 3)
  • Principles of design of structures and correlation with buildings ( Para no. 7 of IS 1893- Part 1)
  • Structural plan density (SPD) – Practical difficulties in accommodating shear wall as per SPD, Behaviour of the structure with different values of SPD
  • Panel discussion wherein discussion points suggested by the engineers through registration form will be discussed.

We will also attempt to address few of the questions received from participants through live chat.

In the following registration form, you may share the specific discussion points related to the draft standards which may be taken up during the live session.

If you are willing to address the audience as a speaker then please connect with us through email address:  contact@sqveconsultants.com

Schedule

Title: Panel Discussion on draft standards | IS 1893 (Part 1 & Part 2)

DATE : 15-JUN-23

TIME : 8:30PM to 10:00PM IST

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

RCC-STR-001: Design of RCC structures 

We are receiving number of queries related to design of RCC structures based on IS 456:2000 and IS 13920:2016 with a specific focus on the software applications in STAAD Pro, RCDC and ETABS. In this regard, we are glad to launch a unique online course which addresses few of the practical difficulties being faced by the engineers for design of RCC structures. In the course, we will discuss the required concepts and fundamentals along with the software. We will generate various study models for quick comparison of the results from different software. The results will be compared and the important findings will be discussed in detail. The same will be extremely useful for preparation of in-house check-list, working procedure, Do’s and Don’ts, etc.

The course will commence from 21-JUN-23.

Click here for more details.

Feedback of few participants for previous online courses”

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Categories
Civil Engineering Earthquake Engineering Structural Engineering

Session 61: Discussion on DRAFT IS 1893 (Part 2)

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Thank you all for actively participating in the live technical discussion related to draft IS 1893 (Part 1) on 18-MAY-23. If you have missed out the session, then you may go through the recording at following link:

Session 60: Discussion on draft IS 1893 (Part 1)

Recently, BIS has published draft standard of IS 1893 (Part 1) and IS 1893 (Part 2).

Doc. No.Title
CED 39(22343)WCDraft Indian Standard Criteria for Earthquake Resistant Design of Structures Part 1 General Provisions [Seventh Revision of IS 1893 (Part 1)]      
CED 39(22345)WCDraft Indian Standard Criteria for earthquake resistant design of structures Part 2 Buildings [Seventh revision of IS 1893 (Part 1)]

Draft standard of IS 1893 (Part 1) contains general provisions on earthquake hazard applicable to all structures.

Draft standard of IS 1893 (Part 2) contains provisions specific to earthquake resistant design of buildings.

Links for downloading the documents:

https://www.services.bis.gov.in/tmp/WCCED21022345_26042023_1.pdf

https://www.services.bis.gov.in/tmp/WCCED21022343_26042023_2.pdf

There are significant changes proposed in the draft standards, few of the same are mentioned below:

IS 1893 (Part 1)

  • Earthquake zone map is revised
  • Design horizontal acceleration coefficients are specified for strength and serviceability
  • Design methodology included for Architectural Elements and Utilities (AEU)
  •  Categories of structures are included with requirement of different return period of earthquakes for strength and serviceability
  • Procedure included for site specific earthquake hazard
  • Performance expectation of the structure is detailed out.
  • Range of modulus of subgrade reaction is mentioned.
  • Soil stiffness calculations are added, etc.

IS 1893 (Part 2)

  • Criteria are added for masonry buildings and steel buildings
  • Response reduction factors are modified and renamed as Elastic force reduction factors
  • Provisions on torsion is updated
  • Structural plan density of the structural walls is varied with earthquake zone
  • For RCC buildings, stiffness modifiers have same values for strength and serviceability
  • Limits on lateral storey drift in building is mentioned with respect to seismic zone
  • Concept of torsional flexibility is added
  • Provisions added for buildings on sloping ground
  • Displacement calculations added for Architectural elements and utilities
  • Admissible structural systems in RC buildings for different earthquake zone is added.
  • Admissible structural systems in Steel buildings for different earthquake zone is added.
  • For steel buildings, for seismic zone 4, SMRF and EBF are suggested. For zone 5 & 6, only EBF is allowed, etc.

Last date for sending the comments to BIS is 25-Jun-2023.

As there are significant changes in the draft standards, we are planning to conduct the multiple sessions for the same. 2nd session is planned on 01-JUN-23 wherein Bhavin Shah (Founder & CEO, SQVe Consultants) will share his understanding of the document IS 1893 (Part 2) from the perspective of practicing engineer.

In the following registration form, you may share the specific discussion points related to the draft standards which may be taken up during the live session.

If you are willing to address the audience as a speaker then please connect with us through email address:  contact@sqveconsultants.com

Schedule

Title: Discussion on draft standards | IS 1893 (Part 2)

DATE : 01-JUN-23

TIME : 8:30PM to 10:00PM IST

Brief about Expert

Bhavin Shah – Founder & CEO, SQVe Consultants

He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

STEEL-STR-006: Design of connections for steel structures | EUROCODE-3 | AISC 360-22 | IS 800:2007 | RAM connection

Design of connections for steel structures as per IS 800:2007 is still grey area. We have recently launched an online course to address the important area. In the course, we will discuss different limit states and different parameters for the connection design as per Eurocode-3 and AISC 360-22. Thereafter, we will address the connection design as per IS code. Software RAM connection will be used for the connection design during the program.

Click here for more details.

RS-STR-001: Get access to 98 recorded sessions

We are excited to announce the availability of recorded sessions from our previous online courses for structural engineers. These sessions cover a wide range of topics including earthquake resistant design, wind engineering, software training for STAAD Pro & ETABS, design of steel structures, etc. With a total of 98 sessions and over 140 contact hours, this library of recordings is a valuable resource for anyone looking to enhance their knowledge and skills in the field of structural engineering. The content of the course will be gradually released over the course of the 8-month duration, ensuring that participants have ample time to digest and apply the material. Don’t miss out on this opportunity to enhance your skills and stay ahead of the curve!

Click here for more details.

Feedback of few participants for previous online courses”

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Categories
Earthquake Engineering Structural Engineering

Session 60: Discussion on DRAFT IS 1893 (Part 1 & 2)

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Recently, BIS has published draft standard of IS 1893 (Part 1) and IS 1893 (Part 2).

Doc. No.Title
CED 39(22343)WCDraft Indian Standard Criteria for Earthquake Resistant Design of Structures Part 1 General Provisions [Seventh Revision of IS 1893 (Part 1)]      
CED 39(22345)WCDraft Indian Standard Criteria for earthquake resistant design of structures Part 2 Buildings [Seventh revision of IS 1893 (Part 1)]

Draft standard of IS 1893 (Part 1) contains general provisions on earthquake hazard applicable to all structures.

Draft standard of IS 1893 (Part 2) contains provisions specific to earthquake resistant design of buildings.

Links for downloading the documents:

https://www.services.bis.gov.in/tmp/WCCED21022345_26042023_1.pdf

https://www.services.bis.gov.in/tmp/WCCED21022343_26042023_2.pdf

There are significant changes proposed in the draft standards, few of the same are mentioned below:

IS 1893 (Part 1)

  • Earthquake zone map is revised
  • Design horizontal acceleration coefficients are specified for strength and serviceability
  • Design methodology included for Architectural Elements and Utilities (AEU)
  •  Categories of structures are included with requirement of different return period of earthquakes for strength and serviceability
  • Procedure included for site specific earthquake hazard
  • Performance expectation of the structure is detailed out.
  • Range of modulus of subgrade reaction is mentioned.
  • Soil stiffness calculations are added, etc.

IS 1893 (Part 2)

  • Criteria are added for masonry buildings and steel buildings
  • Response reduction factors are modified and renamed as Elastic force reduction factors
  • Provisions on torsion is updated
  • Structural plan density of the structural walls is varied with earthquake zone
  • For RCC buildings, stiffness modifiers have same values for strength and serviceability
  • Limits on lateral storey drift in building is mentioned with respect to seismic zone
  • Concept of torsional flexibility is added
  • Provisions added for buildings on sloping ground
  • Displacement calculations added for Architectural elements and utilities
  • Admissible structural systems in RC buildings for different earthquake zone is added.
  • Admissible structural systems in Steel buildings for different earthquake zone is added.
  • For steel buildings, for seismic zone 4, SMRF and EBF are suggested. For zone 5 & 6, only EBF is allowed, etc.

Last date for sending the comments to BIS is 25-Jun-2023.

As there are significant changes in the draft standards, we are planning to conduct the multiple sessions for the same. First of such session is planned on 18-MAY-2023 wherein Bhavin Shah (Founder & CEO, SQVe Consultants) will share his understanding of the documents from the perspective of practicing engineer.

In the following registration form, you may share the specific discussion points related to the draft standards which may be taken up during the live session.

If you are willing to address the audience as a speaker then please connect with us through email address:  contact@sqveconsultants.com

Schedule

Title: Discussion on draft standards | IS 1893 (Part 1) & (part 2)

DATE : 18-MAY-23

TIME : 8:30PM to 10:00PM IST

Brief about Expert

Bhavin Shah – Founder & CEO, SQVe Consultants

He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

STEEL-STR-006: Design of connections for steel structures | EUROCODE-3 | AISC 360-22 | IS 800:2007 | RAM connection

Design of connections for steel structures as per IS 800:2007 is still grey area. We have recently launched an online course to address the important area. In the course, we will discuss different limit states and different parameters for the connection design as per Eurocode-3 and AISC 360-22. Thereafter, we will address the connection design as per IS code. Software RAM connection will be used for the connection design during the program.

Click here for more details.

RS-STR-001: Get access to 98 recorded sessions

We are excited to announce the availability of recorded sessions from our previous online courses for structural engineers. These sessions cover a wide range of topics including earthquake resistant design, wind engineering, software training for STAAD Pro & ETABS, design of steel structures, etc. With a total of 98 sessions and over 140 contact hours, this library of recordings is a valuable resource for anyone looking to enhance their knowledge and skills in the field of structural engineering. The content of the course will be gradually released over the course of the 8-month duration, ensuring that participants have ample time to digest and apply the material. Don’t miss out on this opportunity to enhance your skills and stay ahead of the curve!

Click here for more details.

Feedback of few participants for previous online courses”

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Categories
Civil Engineering Earthquake Engineering Structural Engineering

Session 58: Retrofitting of existing structures in India

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

It’s necessary, now more than ever post Turkey Earthquakes, to seriously review the existing building structures for ensuring satisfactory performance even in high intensity earthquakes in India.

How safe are the existing structures in India during seismic events??… is a question we are being asked everyday.

I must mention an important fact here, before embarking on any further discussion on the subject, that National Building Code has mandated a Technical Audit of all public buildings more than 15m high, every 3 to 5 years, and buildings found unsafe to be sealed and duly retrofitted before being permitted to be used. These Audits must cover Structural Safety Audit as well as a comprehensive review of electrical and Fire installations as well as conformance to the latest bye laws and the Structural Audit thus carried out will be based on the latest revision of Earthquake Codes, and will bridge the compliance gap with Codal guidelines. It will also ensure safety of lives and safety of precious infrastructure in a serious earthquake close to the region so critical for a fast developing Indian economy. We cannot depend on Government alone to accomplish this Herculean effort and all individual building owners must come forward to get Structural Audits and Strengthen their building structures to make them safe and Code Compliant.

All existing buildings need to be reviewed with latest version of BIS Codes, duly allowing for a suitable reduction in Base Shear as per BIS 15988 and strengthening must be carried out to bring it to a Code compliant level. Else, Delhi NCR may witness scenes similar to Turkey and Syria or worse. Special focus must be given to Hospitals, schools, critical communications and Transport infrastructure (Especially Elevated Metro stations, which are all basically stilted structures with extreme mass and stiffness irregularity)

Ms. Sangeeta Wij

In the upcoming live event, Ms. Sangeeta Wij will join us for the very important discussion.

It would be great if you can share your specific queries/doubts related to the subject in advance which would help us to structure the flow of discussion.

In the following registration form, you may share the specific doubts/questions related to the topic or you may share your point of view, discussion points, etc. which may be addressed during the session.

Schedule

Title: Retrofitting of the existing structures in India for earthquake resistant design

DATE : 20-APR-23

TIME : 4:30PM to 6:00PM IST

Brief about Expert

mS. SANGEETA WIJ – Managing Partner (SD ENGINEERING CONSULTANTS LLP)

Carrying out Structural analysis, design and drawings work for a large no of Projects in NCR and pan India, as also review of many existing Projects, based on BIS Codes of Earthquake resistant designs and the best practices. For a good Structural Audit, complete due diligence is to be exercised and a Detailed Report presented to the Clients, highlighting the gaps in structural capacities and demand. It is now a challenge to correctly assess the feasibility of the retrofit scheme proposed with meeting the desired demand for various structural elements .

Mrs Wij graduated in 1982 and worked in RITES before staring her own consultancy form in 1996. Her firm SD ENGINEERING CONSULTANTS LLP has completed over a 1000 prestigious Structural engineering assignments for a large no of Metro stations(elevated and underground), Hospitals, Schools, Commercial, residential and Industrial Projects involving complex Steel and RCC designs. SDEC has been involved in Audits of Commercial Residential and Industrial Clients as also World Bank and NDMA looking for Higher level Advanced Analysis of Structures . Most Health facilities and Hospitals have been strengthened to achieve Immediate Occupancy level , as per NDMA Hospital Safety Guidelines.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

RS-STR-001: Get access to 98 recorded sessions

We are excited to announce the availability of recorded sessions from our previous online courses for structural engineers. These sessions cover a wide range of topics including earthquake resistant design, wind engineering, software training for STAAD Pro & ETABS, design of steel structures, etc. With a total of 98 sessions and over 140 contact hours, this library of recordings is a valuable resource for anyone looking to enhance their knowledge and skills in the field of structural engineering. The content of the course will be gradually released over the course of the 8-month duration, ensuring that participants have ample time to digest and apply the material. Don’t miss out on this opportunity to enhance your skills and stay ahead of the curve!

Click here for more details.

Feedback of few participants for previous online courses”

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Categories
Earthquake Engineering Industrial Structures Structural Engineering

Session 57: IS 1893 (Part 4)

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

India has already witnessed devastating earthquakes in the past and may witness even higher intensity of earthquakes in the future. Industrial structures are highly vulnerable during seismic events as they are irregular to meet the functional requirements. IS 1893 (Part 4) is addressing the aspects of earthquake resistant design of industrial structures in India.

Recently, BIS has published draft standard of IS 1893 (Part 4) for comments. Following are the details of the document:

  • Document Number : CED 39 (18642)WC
  • Title of the document : Draft Indian Standard Criteria for Earthquake Resistant Design of Structures, Part 4 Industrial Structures and Stack- like Structures, [Sixth Revision of IS 1893 (Part 4)]                                                                                                              

    Link for downloading the draft document:

    https://www.services.bis.gov.in/tmp/WCCED21018642_02022023_2.pdf

    There are several major changes made in the draft standard.

    We are planning to conduct live discussion for this important area.

    In the following registration form, you may share the specific points related to the topic which may be discussed during the session.

    Brief about Speaker

    Bhavin Shah – Founder & CEO, SQVe Consultants

    He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

    Schedule

    Date: 23-MAR-23

    Time: 4:30PM to 5:30PM IST

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. .

    _____________________________________________

    An online course related to design of steel structures as per AISC 360-22 will commence from 15-MAR-23. The course will cover discussion on important clauses of the code AISC 360-22, AISC 341-16, AISC 358-16 as well as application of same in the software STAAD.Pro & RAM connection. The course will cover the important areas such as stability of structures, notional loads, P- delta analysis, direct analysis method, design of compression members with and without slender elements, design of member for bending, design of member for combined forces, design of simple connections, design of moment connections, earthquake resistant design aspects, etc. Click here for more details.

    Feedback of few participants for previous online courses”

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    Categories
    Earthquake Engineering Industrial Structures IS Code Structural Engneering

    Session 48 : Industrial structures | IS 1893 (Part 4):2015

    INTRODUCTION

    LIVE TECHNICAL DISCUSSION SERIES

    Industrial structures are highly irregular to meet the functional requirements and hence they are vulnerable to the seismic events. For earthquake resistant design of industrial structures, IS 1893 (Part 4) : 2015 needs to be followed. Around 2021, the revised draft code was circulated by BIS. However, the updated code has not been issued yet.

    We have received numbers of request from engineers to conduct live technical discussion related to earthquake resistant design of industrial structures based on IS 1893 (Part 4):2015. Accordingly, the live discussion is arranged as follows:

    The session will be conducted by Bhavin Shah (Founder & CEO, SQVe Consultants).

    Please share the queries / discussion points related to IS 1893 (Part 4) in the following registration form. It would help us to structure the discussion.

    The event is sponsored by Sanghi Cement.

    Schedule

    DATE : 30-SEP-22

    TIME : 4:00 PM TO 5:30 PM IST

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE.

    Please share the queries / discussion points related to IS 1893 (Part 4) in the following registration form. It would help us to structure the discussion.

    STEEL-STR-002 : ONLINE WORKSHOP – Design of connections for steel structures

    Learn fundamental and the concepts related to steel connection design based on Eurocode-3, AISC 360-16 & IS 800:2007. Hands-on practice will be organised by installation of RAM connection software in the system of registered participants. The workshop will commence from 3-OCT-22.

    For more details, please click here

    Feedback of few participants for previous online courses"

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    Categories
    Earthquake Engineering News & Events Structural Engneering

    Session 11 : Amendment no. 2 for IS 1893 (Part 1) : 2016 & IS 13920 : 2016

    Recently, BIS published the amendments related to IS 1893 (Part 1) : 2016 & IS 13920 in November, 2020. The article shows some of the major changes made in the code as per my understanding. Only brief details are mentioned below, for details please refer the amendments.

    Amendment no. 2 of IS 1893 (Part 1) : 2016

    1.     Clause related to vertical earthquake shaking is modified. The requirements are added for embankments, dams, bridges, etc. Also, the criteria for consideration of vertical earthquake shaking are modified. 

    2.     The methodology for calculation of torsional irregularity is updated. The maximum displacement should be checked against the average displacement as against the minimum displacement in the previous version of the code. For more details, please refer the amendment.

     3.     For a building with re-entrant corners, three dimensional dynamic analysis to be performed with the flexible floor diaphragm. If there is a rigid diaphragm in the building then two separate analysis to be performed, firstly with flexible diaphragm and secondly with the rigid diaphragm. The worst effects to be considered from both the analysis.

     4.     For out of plane offset in vertical elements, the forces and moments due to earthquake effects in the elements connecting the two vertical elements with out of plane offset elements, the vertical element supporting the offset, and connections shall be enhanced by a factor of at least 2.5.

     5.     The provisions for stiffness irregularity are further clarified and few changes are made as well. In the note, it is mentioned that this provision is not applicable to such storeys, which have: (a) lower height, where services and utilities are housed, or (b) outrigger frame members placed in them.

     6.     For weak storey irregularity – buildings with strength irregularity shall not be permitted. In case, the weak storey is because of URM infills, provisions of 7.10 shall be followed.

     7.     Floating columns – Such columns are likely to cause concentrated damage in the structure, and are undesirable. A building with floating columns shall not be permitted, if the floating columns are part of or supporting the primary lateral load resisting system.’

     8.     Irregularity related to “Irregular Modes of Oscillation in Two Principal Plan Directions” is further clarified. It is also mentioned that this provision is not applicable to buildings with large podiums in the lower storeys.

     9.     For importance factor, “school” is replaced with the “educational building”.

     10.  OBF is not allowed in seismic zone III, IV & V.

     11.  Provisions for flat slab – structural wall system are further clarified.

     12.  Formula for Aw is modified and now it is same as when the code was published in 2016. It is mentioned that The value of Ta obtained shall neither be taken to be more than that given in 7.6.2 (a) nor less than that given in 7.6.2 (c).

     13.  In case of URM, RC members shall be designed for the governing combinations of stress resultants arising from structural analysis of:

    a) Bare frame building, and

    b) Frame building with URM infills.

    14. For other details, please refer the amendment.

     Amendment no. 2 of IS 13920 : 2016

    1.    Steel reinforcement shall comply with all of the following:

    a) Elongation shall be at least 14.5 percent,

    b) Ratio of ultimate stress to 0.2 percent proof stress shall not exceed 1.25,

    c) Ratio of ultimate stress to 0.2 percent proof stress shall be at least 1.15, and

    d) Steel shall be only of strength grades with minimum 0.2 percent proof stress of 415 MPa, 500 MPa or 550 MPa, in addition to other requirements of IS 1786.’

     2.     In cl no. 9.1.1, modifications are made for calculation of nominal shear strength of concrete in a beam-column joint.  

    3.     In cl no. 9.1.2, provisions related to design shear stress demand are further clarified.

    4. For other details, please refer the amendment. 

    We are planning live technical discussion for the amendments on 20-DEC-20 at 11:00AM IST. Please share your comments / discussion points in the below comment box. We will discuss the same during live session of 20-DEC-20.

    Link of the live session is attached below. Please like and share this video with the interested engineers in your circle.

    Session 11 : Recent amendments for IS 1893 (Part 1):2016 and IS 13920:2016 – Live discussion

    An online course related to earthquake resistant design will start from 17-MAR-22. Please watch the introductory video below:

    EQ-STR-002 : Learn concepts of earthquake resistant design

    Click below for more details and registration for EQ-STR-002