Categories
Earthquake resistant design Structural Engineering tall buildings

Collapse of 30+ storey building | Session 91

INTRODUCTION

SQVE STRUCTURAL SUMMIT | SESSION 91

On 28 March 2025, the world watched in disbelief as a 30+ storey tower in Bangkok, still under construction, collapsed dramatically. Caught on camera from multiple angles, the footage has since gone viral and sparked intense discussions across the engineering community. What makes this incident even more alarming is that Bangkok is located over 1,000 km from the earthquake’s epicenter—yet the building still gave way.

In response to numerous requests, we are organizing a focused technical session to explore this unprecedented event.

What to Expect in the Session:

  • A visual breakdown and timeline of the collapse using available footage
  • Insights into potential causes—design flaws, seismic underestimation, or construction lapses ??
  • Collated reasons from experienced structural engineers
  • Learning from failure

This is more than a case study. It’s an opportunity for professionals and learners alike to come together, analyze a failure, and draw essential lessons that can shape the future of structural safety.

Join us live on 29 April 2025 at 8:30 PM IST.
Be part of this important conversation and contribute to a stronger, safer built environment.

The session will be conducted by Bhavin Shah (SQVe Consultants).

In the registration form, you may share probable cause of failure of structure in your opinion. We will discuss the same during the session.

Schedule

DATE: 29-APR-25

TIME: 8:30PM TO 10:00PM IST

HOW TO REGISTER ?

Registration is FREE.

In the registration form, you may share probable cause of failure of structure in your opinion. We will discuss the same during the session.

Access recorded sessions of previous online courses

SQVe Consultants has successfully launched multiple unique online courses over the past four years, addressing current industry challenges and their solutions. These courses have covered a wide range of topics, including wind engineering, earthquake-resistant design, machine foundation design, pipe-rack design, steel and RCC structure design, PEB structures, liquid retaining structures, foundation design, nonlinear dynamic analysis, design of connections, etc. The courses focused on the latest provisions of key IS codes such as IS 800:2007, IS 16700:2023, IS 1893 (Part 1):2016, IS 1893 (Part 2):2014, IS 1893 (Part 4):2024, IS 13920:2016, IS 3370:2021, etc. along with software applications like STAAD Pro, ETABS, RCDC, RAM Connection, SAFE & STAAD Foundation Advanced. For steel structure design, specialized courses on AISC 360-22 and EUROCODE-3 were also conducted.

In total, 16 unique online courses have been delivered, comprising 247 sessions and 370+ contact hours. The complete list of 247 sessions with titles is provided in Annexure A, while links to individual courses can be found in Annexure B of this document.

Download brochure of recorded sessions


We take this opportunity to thank all participants for their support and valuable feedback, which continues to inspire us in expanding these learning initiatives.


All recorded sessions from these courses are available for self-paced learning, allowing engineers to access them at their convenience. Based on inquiries from professionals and the most popular course combinations, we have structured 11 specialized packages by clubbing 247 sessions from 16 online courses

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Get access to free e-books:

  1. Design of gravity columns: https://academy.sqveconsultants.com/offers/sGWGCTth/checkout

Comments on draft of IS 1893 (Part 4): https://academy.sqveconsultants.com/offers/KsFTBovx/checkout

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (21K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Categories
Structural Engineering Wind engineering

IS 875 (Part 3):2015 | Session 90

INTRODUCTION

SQVE STRUCTURAL SUMMIT | SESSION 90

IS 875 (Part 3) : 2015, the Indian standard for wind loads on buildings and structures, is one of the very important document structural design practice. Whether you’re working on a low-rise industrial shed or a tall residential tower, this code plays a crucial role in estimating lateral loads and ensuring structural safety. With the document currently under revision, this is the ideal moment for the engineering community to come together and reflect on its application, effectiveness, and the challenges faced in real projects.

We are hosting an open brainstorming session that invites structural engineers, designers, consultants, and code users to share their doubts, practical difficulties, and grey areas they encounter while working with IS 875 (Part 3):2015. This is not a lecture — it’s a collective exchange of ideas. We encourage engineers to bring in queries related to wind speed zoning, interpretation of terrain categories, topography factors, pressure coefficients for different roof shapes, issues around the dynamic response of tall structures, cladding and façade design pressures, risk coefficient considerations, gust factor calculations, etc.

This session is meant to be a space to ask questions, share field experiences, and contribute ideas that may even influence how the revised code evolves. Whether you’re an experienced professional or a young engineer just stepping into structural design, your questions and insights are welcome.

You may share specific queries, doubts or discussion points related to IS 875 Part-32015 in advance through registration form.

Expert – Er. Dr. Abhay Gupta

Er. Dr. Abhay Gupta has obtained his BE(Civil) in 1981 & subsequently ME(Structures) from SGSITS Indore; and Ph.D. from University of Roorkee, Roorkee (now IIT Roorkee) in the area of “Aerodynamic Interference in Tall Rectangular Buildings: Wind Tunnel Studies” in 1996. He has more than 35 years of experience in the field of Civil Engineering construction and Structural design. Dr. Abhay Gupta is one of the Directors of Skeleton Consultants Pvt. Ltd. Noida. Dr Gupta has also worked as Principal consultant for establishment of Wind tunnel facility at Guna MP.

Schedule

DATE: 24-APR-25

TIME: 8:00PM TO 9:30PM IST

HOW TO REGISTER ?

Registration is FREE.

In the following registration form, you may mention specific discussion points related to IS 875 (Part 3) : 2015 .

Access recorded sessions of previous online courses

SQVe Consultants has successfully launched multiple unique online courses over the past four years, addressing current industry challenges and their solutions. These courses have covered a wide range of topics, including wind engineering, earthquake-resistant design, machine foundation design, pipe-rack design, steel and RCC structure design, PEB structures, liquid retaining structures, foundation design, nonlinear dynamic analysis, design of connections, etc. The courses focused on the latest provisions of key IS codes such as IS 800:2007, IS 16700:2023, IS 1893 (Part 1):2016, IS 1893 (Part 2):2014, IS 1893 (Part 4):2024, IS 13920:2016, IS 3370:2021, etc. along with software applications like STAAD Pro, ETABS, RCDC, RAM Connection, SAFE & STAAD Foundation Advanced. For steel structure design, specialized courses on AISC 360-22 and EUROCODE-3 were also conducted.

In total, 16 unique online courses have been delivered, comprising 247 sessions and 370+ contact hours. The complete list of 247 sessions with titles is provided in Annexure A, while links to individual courses can be found in Annexure B of this document.

Download brochure of recorded sessions


We take this opportunity to thank all participants for their support and valuable feedback, which continues to inspire us in expanding these learning initiatives.


All recorded sessions from these courses are available for self-paced learning, allowing engineers to access them at their convenience. Based on inquiries from professionals and the most popular course combinations, we have structured 11 specialized packages by clubbing 247 sessions from 16 online courses

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Get access to free e-books:

  1. Design of gravity columns: https://academy.sqveconsultants.com/offers/sGWGCTth/checkout

Comments on draft of IS 1893 (Part 4): https://academy.sqveconsultants.com/offers/KsFTBovx/checkout

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (21K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Categories
Earthquake resistant design Industrial Structures Structural Engineering

IS 1893 (Part 4)

INTRODUCTION

SQVE STRUCTURAL SUMMIT

The Bureau of Indian Standards (BIS) has released a draft of the Indian Standard Criteria for Earthquake Resistant Design of Structures, Part 4 – Industrial Structures. This document marks the third revision of IS 1893 (Part 4) and incorporates significant updates aimed at improving the seismic resilience of industrial structures.

Following are major changes in the document as mentioned in forward part:

  • Categorisation of industrial structures have been aligned with the categorisation of structures provided in IS 1893 (Part 1)
  •  Importance factors have been adjusted in view of the revised earthquake hazard
  • Response reduction factor has been renamed as Elastic Force Reduction Factor and values have been revised for some structural systems
  •  Provisions on interaction effects between primary and secondary systems have been revised
  • Generation of In-structure Response Spectra (ISRS) for use in design of secondary systems brought under the purview of this standard
  • Operational and Functional Components (OFCs) defined and procedures for design of OFCs included
  • Estimation of natural period for stack-like structure included up to first three modes and clarity on the limitation of simplified method is provided
  • Provisions on chimneys and stacks have been revised, etc.

There are significant changes in the document which may impact the current design practices related to industrial structures.

We will discuss this very important document in the upcoming session of SQVe Strucural Summit. Mr. Bhavin Shah (SQVe) will conduct the session.

Our overall aim is to spread awareness about the draft document and encourage engineers to share their comments / suggestions to relevant BIS technical committee.

Let’s work together for improvement in our national standards.

Schedule

DATE: 29-MAR-25

TIME: 8:30PM to 10:00PM IST

HOW TO REGISTER ?

The session will be conducted using ZOOM software.

Registration is FREE. You will receive link for participation through email.

RCC-STR-003: Foundation Engineering (Part 1)

The course will provide a comprehensive understanding of the finite element analysis of foundations, focusing on design using SAFE and STAAD Foundation Advanced. Participants will gain insights into the comparative analysis of software-generated results against manual calculations, ensuring a robust understanding of foundation behavior. A key aspect of the course is the geotechnical-structural interface, emphasizing the importance of collaboration between geotechnical and structural engineers while also covering essential IS codes related to geotechnical engineering. The foundation design module will include hands-on exercises using SAFE as per IS 456:2000, with an option to explore STAAD Foundation Advanced as per ACI 318 upon request. Case studies will illustrate real-world applications, covering isolated foundations, combined foundations, octagonal foundations for tall vertical vessels in the oil and gas industry, foundations for cantilever retaining walls, transmission line towers, annular raft foundations for chimneys, and raft foundations for tall buildings. Additionally, the course will highlight ways to enhance the quality of geotechnical investigations, focusing on critical areas that can improve the accuracy and reliability of soil investigations.

For more details, you may visit link: https://sqveconsultants.com/rcc-str-003

You may download brochure of the course: Download now

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

You can purchase access to the recorded sessions. Please connect as at email address: steel @sqveconsultants.com for the same.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (17K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Categories
Composite structures Structural Engineering

Session 88: Composite structures

INTRODUCTION

SQVE STRUCTURAL SUMMIT

Title of talk: The Smart Choice: Steel-Concrete Composite Structures

Steel or concrete? Why not both! Steel-concrete composite structures bring out the best in both materials—steel’s strength and concrete’s durability—to create stronger, lighter, and more efficient designs.

In this talk, Dr Jawed Qureshi explores why composite structures are reshaping modern engineering. He’ll break down how composites reduce material waste, cut costs, and improve structural performance. Whether you’re designing bridges, high-rises, or industrial buildings, these systems offer smarter solutions that traditional methods can’t match.

You’ll learn how engineers are using composites to build faster and stronger, plus the key design principles that make them work. You will also see real-world examples proving why this approach is the future of structural engineering.

If you want to stay ahead of the curve, optimise your designs, and create smarter, safer structures, this session is for you.

Your specific queries are invited in advance for the session. We will attempt to address the same in the upcoming session.

Expert speaker

Dr Jawed Qureshi is an expert in steel-concrete composite design, with extensive research, teaching, and industry experience. He holds a PhD in Steel-Concrete Composite Structures from the University of Leeds and has worked at the University of Leeds and the University of Warwick before joining the University of East London in 2013. He is currently a Senior Lecturer in Structural Engineering and Design.

Dr Qureshi has published over 50 international conference and journal papers and has collaborated on various steel-concrete composite projects with industry partners in the UK. He actively promotes structural engineering through his YouTube channel and LinkedIn, aiming to educate and inspire students and professionals.

Committed to advancing engineering through education and training, Dr Qureshi strives to make a lasting impact on the profession.

Schedule

At present, we are collating the discussion points / queries from the participants for Steel-Concrete Composite Structures. Your specific queries / discussion points are invited in the following registration form.

Registered participants will receive exact date and time along with the details to participate in the live session.

HOW TO REGISTER ?

Registration is FREE. You will receive schedule for the event and link for participation through email.

RCC-STR-003: Foundation Engineering (Part 1)

The course will provide a comprehensive understanding of the finite element analysis of foundations, focusing on design using SAFE and STAAD Foundation Advanced. Participants will gain insights into the comparative analysis of software-generated results against manual calculations, ensuring a robust understanding of foundation behavior. A key aspect of the course is the geotechnical-structural interface, emphasizing the importance of collaboration between geotechnical and structural engineers while also covering essential IS codes related to geotechnical engineering. The foundation design module will include hands-on exercises using SAFE as per IS 456:2000, with an option to explore STAAD Foundation Advanced as per ACI 318 upon request. Case studies will illustrate real-world applications, covering isolated foundations, combined foundations, octagonal foundations for tall vertical vessels in the oil and gas industry, foundations for cantilever retaining walls, transmission line towers, annular raft foundations for chimneys, and raft foundations for tall buildings. Additionally, the course will highlight ways to enhance the quality of geotechnical investigations, focusing on critical areas that can improve the accuracy and reliability of soil investigations.

For more details, you may visit link: https://sqveconsultants.com/rcc-str-003

You may download brochure of the course: Download now

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

You can purchase access to the recorded sessions. Please connect as at email address: steel @sqveconsultants.com for the same.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (21K + subscribers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Categories
Earthquake Engineering Earthquake resistant design Structural Engineering

Session 87 – IS 1893 (Part 4):2024

INTRODUCTION

SQVE STRUCTURAL SUMMIT

IS 1893 (Part 4):2024, titled “Criteria for Earthquake Resistant Design of Structures Part 4: Industrial Structures Including Stack-Like Structures,” is the second revision of this standard, published by the Bureau of Indian Standards (BIS) in 2024.

This standard provides guidelines for the seismic design and construction of industrial structures, including stack-like structures, to ensure their resilience during earthquakes.

Based on request of few engineers, we will discuss few of the important areas from the document:

  1. When to consider IS 1893 (Part 4): 2024 for design of the structure?
  2. What are the different categories considered in the document?
  3. Basic guidelines for modelling industrial structure
  4. Time period for industrial structures
  5. Effect of damping on the seismic force
  6. Simultaneous consideration of seismic loads from three directions
  7. Requirement of P-Delta analysis
  8. Is it required to perform nonlinear time-history analysis?
  9. Load combinations to be considered for design of the structure, etc.

We are going to discuss these important areas in the upcoming session of SQVe Structural Summit. Mr. Bhavin Shah (SQVe) will conduct the session.

Schedule

DATE: 22-FEB-25

TIME: 8:30PM to 10:00PM IST

HOW TO REGISTER ?

The session will be conducted using ZOOM software.

Registration is FREE. You will receive link for participation through email.

RCC-STR-003: Foundation Engineering (Part 1)

The course will provide a comprehensive understanding of the finite element analysis of foundations, focusing on design using SAFE and STAAD Foundation Advanced. Participants will gain insights into the comparative analysis of software-generated results against manual calculations, ensuring a robust understanding of foundation behavior. A key aspect of the course is the geotechnical-structural interface, emphasizing the importance of collaboration between geotechnical and structural engineers while also covering essential IS codes related to geotechnical engineering. The foundation design module will include hands-on exercises using SAFE as per IS 456:2000, with an option to explore STAAD Foundation Advanced as per ACI 318 upon request. Case studies will illustrate real-world applications, covering isolated foundations, combined foundations, octagonal foundations for tall vertical vessels in the oil and gas industry, foundations for cantilever retaining walls, transmission line towers, annular raft foundations for chimneys, and raft foundations for tall buildings. Additionally, the course will highlight ways to enhance the quality of geotechnical investigations, focusing on critical areas that can improve the accuracy and reliability of soil investigations.

For more details, you may visit link: https://sqveconsultants.com/rcc-str-003

You may download brochure of the course: Download now

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

You can purchase access to the recorded sessions. Please connect as at email address: steel @sqveconsultants.com for the same.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (17K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Categories
Structural Engineering

From Calculations to Creativity: Discovering Intuition in Structural Analysis | Session 86

INTRODUCTION

SQVE STRUCTURAL SUMMIT

What sets great engineers apart? It’s not just their ability to crunch numbers—it’s their intuition.

This intuition enables engineers to predict how structures will perform under various loads and conditions, ensuring safety, efficiency, and robustness.

In this interesting talk, we will invite Dr Jawed Qureshi, Senior Lecturer at University of East London.

In this talk, he will take things back to the basics, but in the best way possible. He will explore why understanding why a structure behaves the way it does—not just how to solve for forces and moments—can completely change the way you approach structural analysis and design.

It’s about building a mental model of structural performance. This is vital in a world where reliance on software can sometimes overshadow understanding. Without this core intuition, an engineer is at risk of producing designs that may work mathematically but fail practically.

Structural behaviour isn’t just for specialists—it’s a mindset every engineer should embrace.

Schedule

DATE: 21-DEC-24

TIME: 8:30PM IST | 3:00PM GMT

HOW TO REGISTER ?

Registration is FREE. You will receive link for participation through email.

RCC-STR-002: Design of Liquid Retaining Structures | IS 3370

The course will begin with detailed discussions on IS 3370 (Part 1):2021 & IS 3370 (Part 2):2021 along with crack width calculations. Thereafter, we will perform analysis of individual plates, rectangular tanks and circular tanks using design tables of IS 3370 (Part 4/1/2/3):2021. For the similar geometries, we will generate computer model in STAAD Pro using plate elements. The analysis results from the software will be compared with the design table results. In the process, we will highlight do’s and don’ts related to software applications for FEM. Subsequently, we will discuss in detail regarding seismic loads as per IS 1893 (Part 2):2014 along with amendment of 2022. Manual calculations will be performed to get more insight about seismic loads for LRS. Towards end of the course, we will take up couple of case studies for analysis and design of liquid retaining structures. We will also explore usage of STAAD Pro + RCDC and compare the results with the manual calculations. The entire course will be useful for preparation of in-house work procedure, check list, do’s and don’ts for liquid retaining structures.

The course will commence from 19-DEC-24.

For more details, you may visit link: https://sqveconsultants.com/rcc-str-002

You may download brochure of the course: Download now

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

You can purchase access to the recorded sessions. Please connect as at email address: steel @sqveconsultants.com for the same.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (17K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Categories
Maritime structures Structural Engineering

Session 82: Maritime structures | Career opportunities for structural engineers

INTRODUCTION

SQVE STRUCTURAL SUMMIT

Structural design in the maritime sector presents distinct challenges compared to onshore projects. Maritime structures must withstand harsh environmental conditions like high winds, tidal ranges, strong currents, waves, and saltwater corrosion, all of which can compromise their integrity over time. These structures face dynamic loads from waves and wind, leading to fatigue and requiring robust design solutions. Constant exposure to saltwater accelerates material degradation, making advanced corrosion protection critical for long-term durability.

Designing for maritime environments demands specialized skills, including expertise in hydrodynamics, corrosion prevention, and dynamic load analysis. Engineers must be proficient in selecting marine construction materials and developing low-maintenance designs due to the difficulty of accessing these structures for repairs. However, there is a shortage of engineers with these competencies, as few institutions in India offer formal training in maritime structural design. This skills gap can lead to project delays, higher costs, and safety concerns, highlighting the urgent need for targeted education and training programs.

Key Discussion Points for the Upcoming Session:

  • What are the structures included in maritime sector?
  • What skills do young engineers need to develop to succeed in maritime structural design?
  • Are there specific software or tools that engineers must be proficient in to work in maritime design?
  • How does the maritime sector differ from onshore structural design in terms of the professional expertise required?
  • What is the demand for maritime structural engineers, both in India and globally?
  • What career pathways or specializations are available within maritime structural design?
  • What are some common misconceptions about maritime structural design?
  • How does one transition from a conventional structural engineering background into the maritime sector?
  • Discuss some of the most exciting projects in maritime structural design that could inspire young engineers.
  • What opportunities exist for engineers in India to receive training in maritime structural design?, etc.

This discussion will highlight career opportunities and essential skills for excelling in this specialized field.

You may share specific queries or doubts related to maritime sector which you would like to get it addressed in the session. We will attempt to include the same in the discussion.

Expert – Mr. Mathew Simon

Mr. Mathew Simon is a seasoned Structural Engineering Professional who has a total work experience of over 32 years including 27 years plus in Oil and Gas with 19 years in supervisory positions. He worked in Engineers India Limited (EIL) , New Delhi for over 20 years before moving to Singapore to work in senior positions with McDermott and KBR and later to Tripatra, Indonesia. He has all-round exposure to the Offshore and Maritime Industry during Proposal, Concept/Pre-FEED, FEED, Detailed Engineering and Installation Project phases in Consulting/PMC, EPC and Certification roles.

He is highly experienced in Structural Analysis, Detailed Design and Engineering Management for Maritime Structures for LNG, Industrial Structures, Fixed Offshore Platform Projects- Jackets and Topsides (including Float-over installed), Modules, Bridges for CPP (Process Platforms), Well Head Platforms and Living Quarters Platforms. He also has a working knowledge of Subsea Structures (ILTs, FLETs, PLETs) and Naval Architecture.

Mr. Mathew Simon is a Civil Engineering Graduate from Calicut University and also holds a MTech in Structural Engineering from IIT Delhi. Through the course of his career, he has led multicultural teams and has had professional interaction with major clients, EPCI and engineering organizations from India, Middle East, APAC and Europe.

Schedule

We plan to record the session offline, ensuring that all the valuable insights from the expert are captured for future viewing. Once the video is published, registered participants will be notified via email with a link to access the session. This allows participants to watch at their convenience and revisit the material whenever needed.

HOW TO REGISTER ?

Registration is FREE.

In the following registration form, you may mention specific queries related to maritime structures . We will attempt to address the same in the upcoming session.

>

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (17K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Categories
Structural Engineering Wind engineering

Session 84: Wind Tunnel Testing for TALL Buildings

INTRODUCTION

SQVE STRUCTURAL SUMMIT

Importance of Wind Tunnel Testing for Tall Buildings

Wind tunnel testing plays a crucial role in ensuring the structural integrity and safety of tall buildings, which are highly susceptible to wind loads due to their height and slenderness. As buildings grow taller, traditional static wind load calculations may not be sufficient to capture the complex aerodynamic forces acting on the structure. Wind tunnel testing helps simulate real-world wind conditions, providing critical data on wind pressure distribution, vortex shedding, and potential aeroelastic effects like dynamic response and acceleration, which can significantly impact occupant comfort and structural safety. Accurate wind load data from these tests allows for optimized design solutions, ensuring safety without over-conservative designs that increase costs.

Image: Windtech Consultants

Key Discussion Points for the Upcoming Session:

  1. Preparation of Terms of Reference (TOR) for Wind Tunnel Testing Agency
    • Defining the scope of testing and performance criteria.
    • Incorporating specific building design requirements (shape, height, terrain).
    • Outlining necessary parameters such as wind speed, pressure coefficients, and dynamic response.
  2. Selection of Wind Tunnel Testing Agency
    • Criteria for choosing a credible and experienced testing agency.
    • Agency accreditation and past project experience.
    • Ensuring proper equipment and methodologies suitable for the scale and location of the building.
  3. Coordination with Wind Tunnel Testing Agency
    • Establishing effective communication channels and timelines.
    • Sharing detailed design models and ensuring proper representation of the project in wind simulations.
    • Addressing iterative processes and revisions based on intermediate results.
  4. Interpretation of Wind Tunnel Test Results
    • Understanding critical outputs such as wind pressure distribution, base shear, and torsional moments.
    • Collaboration between consultants and the testing agency to analyze the results and make necessary adjustments to the structural design.
    • Using test data for comfort assessments, façade design, and aerodynamic modifications to the building.
  5. Application of Results in Structural and Serviceability Design
    • Utilizing wind tunnel data for structural load determination and comparison with code-based values.
    • Analyzing serviceability aspects such as building sway, acceleration limits for occupant comfort, and façade cladding performance.
  6. Challenges and Lessons from Real-World Wind Tunnel Testing Projects
    • Common challenges faced during wind tunnel testing and how they were resolved.
    • Practical advice for ensuring accurate test conditions and avoiding potential pitfalls.

This structured discussion should help structural consultants navigate the technical and procedural challenges associated with wind tunnel testing for tall buildings.

You may share specific queries or doubts related to wind tunnel testing for tall buildings which you would like to get it addressed in the session. We will attempt to include the same in the discussion.

Image: Windtech Consultants

Expert – Er. Dr. Abhay Gupta

Er. Dr. Abhay Gupta has obtained his BE(Civil) in 1981 & subsequently ME(Structures) from SGSITS Indore; and Ph.D. from University of Roorkee, Roorkee (now IIT Roorkee) in the area of “Aerodynamic Interference in Tall Rectangular Buildings: Wind Tunnel Studies” in 1996. He has more than 35 years of experience in the field of Civil Engineering construction and Structural design. Dr. Abhay Gupta is one of the Directors of Skeleton Consultants Pvt. Ltd. Noida. Dr Gupta has also worked as Principal consultant for establishment of Wind tunnel facility at Guna MP.

Schedule

We plan to record the session offline and will notify registered participants once the video is published.

HOW TO REGISTER ?

Registration is FREE.

In the following registration form, you may mention specific queries related to wind tunnel testing for tall buildings . We will attempt to address the same in the upcoming session.

RCC-STR-002: Design of Liquid Retaining Structures | IS 3370 |

The course will begin with detailed discussions on IS 3370 (Part 1):2021 & IS 3370 (Part 2):2021 along with crack width calculations. Thereafter, we will perform analysis of individual plates, rectangular tanks and circular tanks using design tables of IS 3370 (Part 4/1/2/3):2021. For the similar geometries, we will generate computer model in STAAD Pro using plate elements. The analysis results from the software will be compared with the design table results. In the process, we will highlight do’s and don’ts related to software applications for FEM. Subsequently, we will discuss in detail regarding seismic loads as per IS 1893 (Part 2):2014 along with amendment of 2022. Manual calculations will be performed to get more insight about seismic loads for LRS. Towards end of the course, we will take up couple of case studies for analysis and design of liquid retaining structures. We will also explore usage of STAAD Pro + RCDC and compare the results with the manual calculations. The entire course will be useful for preparation of in-house work procedure, check list, do’s and don’ts for liquid retaining structures.

The course will commence from 19-DEC-24.

For more details, you may visit link: https://sqveconsultants.com/rcc-str-002

You may download brochure of the course: Download now

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

You can purchase access to the recorded sessions. Please connect as at email address: steel @sqveconsultants.com for the same.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (17K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Categories
IS 2974 IS 2974 Machine foundation

IS 2974 | Part 1 to 4 | Draft documents | Session 81

INTRODUCTION

SQVE STRUCTURAL SUMMIT

BIS has circulated draft documents of IS 2974 (Part 1 to 4) for design of machine foundations. With the rapid industrial expansion, the installation and efficient operation of heavy machinery have gained critical importance. Machine foundations are designed considering the dynamic characteristics of the machinery, as specified by the manufacturer, along with the dynamic properties of the foundation and the underlying soil or pile system. It is widely recognized that these dynamic properties of the soil or pile system play a key role in ensuring the desired performance of the foundation system.

Advancements in manufacturing technology have led to machines with higher ratings and tighter operational tolerances, making reliability critical and leaving no room for failure. To ensure optimal performance and minimize downtime, machine foundations must be designed with special attention to both their own dynamics and the need to reduce vibrations impacting nearby structures. Detailed vibration analysis is essential for understanding the dynamic behavior of the machine-foundation system. Field data on machine failures suggest that current design practices must be updated to address evolving dynamic requirements and improve foundation performance.

To cater to these objectives, it was decided to overall revise and restructure various Parts of IS 2974 to meet the current demand of satisfactory performance of machines with no room for failures. While restructuring various parts of the code, it was decided to address the parts of the code foundation-wise rather than machine-wise, except the part covering foundations for impact and impulsive load machines, that is, hammers and presses, where the foundation has to be necessarily machine-wise.

Part 1 General provisions
Part 2 Block foundations
Part 3 Frame foundations
Part 4 Foundations for hammers and presses

To discuss these important documents, live discussion is organised on 14-SEP-24 at 8:30pm IST. The session will be conducted by Bhavin Shah (Founder & CEO, SQVe Consultants)

Overall aim of session is to increase awareness about IS codes and to encourage engineers for sharing their valuable comments to BIS for improvement in our national standards.

Schedule

DATE : 14-SEP-24

TIME : 8:30PM TO 10:00PM IST

HOW TO REGISTER FOR THE EVENT?

Registration is FREE.

In the following registration form, you may mention specific queries related to software applications in bridge engineering . We will discuss the same during the live session.

ONG-STR-001: Design of Pipe Rack | Online course

A process pipe rack in the oil and gas industry is a critical structural framework that supports and organizes process pipelines, utility pipelines, electrical cable tray, instrument cable tray, etc. The course will begin with an overview of refinery processes, various process units, function of pipe rack, etc. We will also highlight important interface areas with different disciplines, including process, piping, electrical, instrumentation, electrical and equipment, ensuring a holistic understanding of multidisciplinary coordination for the pipe rack. We will cover details of each step for structural design of the pipe rack, starting from understanding functional requirements, important points to be checked in input documents, preparation of structural system, generating computer model, load calculations and application in the software, analysis & design of pipe rack, connection design, foundation design of pipe rack, etc. Throughout the program, we will cover important provisions of American codes such as ASCE 7-16, AISC 360-16, AISC 341-16, ACI 318-19, etc. along with software applications in STAAD Pro, RAM Connection & RCDC.

For more details, you may visit link: https://sqveconsultants.com/ong-str-001

You may download brochure of the course: Download now

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (11.7K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Categories
Ductile detailing Earthquake Engineering Earthquake resistant design

Session 80: IS 13920 (Part 1 & 2)

INTRODUCTION

SQVE STRUCTURAL SUMMIT

BIS has circulated draft documents of IS 13920 (Part 1 & Part 2) for the comments. As it is mentioned in forward of the document that IS 13920 will split in to 11 parts. Part 1 will be considered as general provisions for earthquake resistance design and detailing and applicable to all the structures. Part 2 is specifically applicable to building types of structures.

To discuss these important documents, live discussion is organised on 27-JUL-24 at 8:30pm IST. The session will be conducted by Bhavin Shah (Founder & CEO, SQVe Consultants)

Overall aim of session is to increase awareness about IS codes and to encourage engineers for sharing their valuable comments to BIS for improvement in our national standards.

We will discuss important areas of the documents. Few of the same are listed below:

IS 13920 (Part 1):

  • Member capacity
  • Structure capacity
  • Low damage in structural elements or Damage in structural elements
  • Geotechnical aspects
  • Architectural Elements and Utilities, etc.

IS 13920 (Part 2):

  • Slenderness ratio of beams at location of plastic hinges
  • For columns, concrete shall be considered to carry no shear when the member is in tension.
  • Structural wall
  • Beam column joints
  • Section classification for steel structures
  • Slenderness requirement for steel column
  • Eccentrically braced frames, etc.

Schedule

DATE : 27-JUL-24

TIME : 8:30PM TO 10:00PM IST

HOW TO REGISTER FOR THE EVENT?

Registration is FREE.

In the following registration form, you may mention specific queries related to software applications in bridge engineering . We will discuss the same during the live session.

Get access to recorded sessions of previous online courses:

Visit online store of SQVe Academy: Our best seller online courses are compiled and different packages are created. You may choose any individual course or package of different courses. Link: https://academy.sqveconsultants.com/store

STEEL-STR-007: Design of PEB structures (Part 1) | Warehouse type structures | STAAD | RAM connection, Link: https://sqveconsultants.com/steel-str-007

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-005 to REC-STR-013 : Access recording of online courses There are total 13 nos. of unique online courses having total 194 sessions with 300+ contact hours.  https://academy.sqveconsultants.com/recorded-sessions

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (11.7K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.