Categories
Civil Engineering Earthquake Engineering Structural Engineering

Session 61: Discussion on DRAFT IS 1893 (Part 2)

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Thank you all for actively participating in the live technical discussion related to draft IS 1893 (Part 1) on 18-MAY-23. If you have missed out the session, then you may go through the recording at following link:

Session 60: Discussion on draft IS 1893 (Part 1)

Recently, BIS has published draft standard of IS 1893 (Part 1) and IS 1893 (Part 2).

Doc. No.Title
CED 39(22343)WCDraft Indian Standard Criteria for Earthquake Resistant Design of Structures Part 1 General Provisions [Seventh Revision of IS 1893 (Part 1)]      
CED 39(22345)WCDraft Indian Standard Criteria for earthquake resistant design of structures Part 2 Buildings [Seventh revision of IS 1893 (Part 1)]

Draft standard of IS 1893 (Part 1) contains general provisions on earthquake hazard applicable to all structures.

Draft standard of IS 1893 (Part 2) contains provisions specific to earthquake resistant design of buildings.

Links for downloading the documents:

https://www.services.bis.gov.in/tmp/WCCED21022345_26042023_1.pdf

https://www.services.bis.gov.in/tmp/WCCED21022343_26042023_2.pdf

There are significant changes proposed in the draft standards, few of the same are mentioned below:

IS 1893 (Part 1)

  • Earthquake zone map is revised
  • Design horizontal acceleration coefficients are specified for strength and serviceability
  • Design methodology included for Architectural Elements and Utilities (AEU)
  •  Categories of structures are included with requirement of different return period of earthquakes for strength and serviceability
  • Procedure included for site specific earthquake hazard
  • Performance expectation of the structure is detailed out.
  • Range of modulus of subgrade reaction is mentioned.
  • Soil stiffness calculations are added, etc.

IS 1893 (Part 2)

  • Criteria are added for masonry buildings and steel buildings
  • Response reduction factors are modified and renamed as Elastic force reduction factors
  • Provisions on torsion is updated
  • Structural plan density of the structural walls is varied with earthquake zone
  • For RCC buildings, stiffness modifiers have same values for strength and serviceability
  • Limits on lateral storey drift in building is mentioned with respect to seismic zone
  • Concept of torsional flexibility is added
  • Provisions added for buildings on sloping ground
  • Displacement calculations added for Architectural elements and utilities
  • Admissible structural systems in RC buildings for different earthquake zone is added.
  • Admissible structural systems in Steel buildings for different earthquake zone is added.
  • For steel buildings, for seismic zone 4, SMRF and EBF are suggested. For zone 5 & 6, only EBF is allowed, etc.

Last date for sending the comments to BIS is 25-Jun-2023.

As there are significant changes in the draft standards, we are planning to conduct the multiple sessions for the same. 2nd session is planned on 01-JUN-23 wherein Bhavin Shah (Founder & CEO, SQVe Consultants) will share his understanding of the document IS 1893 (Part 2) from the perspective of practicing engineer.

In the following registration form, you may share the specific discussion points related to the draft standards which may be taken up during the live session.

If you are willing to address the audience as a speaker then please connect with us through email address:  contact@sqveconsultants.com

Schedule

Title: Discussion on draft standards | IS 1893 (Part 2)

DATE : 01-JUN-23

TIME : 8:30PM to 10:00PM IST

Brief about Expert

Bhavin Shah – Founder & CEO, SQVe Consultants

He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

STEEL-STR-006: Design of connections for steel structures | EUROCODE-3 | AISC 360-22 | IS 800:2007 | RAM connection

Design of connections for steel structures as per IS 800:2007 is still grey area. We have recently launched an online course to address the important area. In the course, we will discuss different limit states and different parameters for the connection design as per Eurocode-3 and AISC 360-22. Thereafter, we will address the connection design as per IS code. Software RAM connection will be used for the connection design during the program.

Click here for more details.

RS-STR-001: Get access to 98 recorded sessions

We are excited to announce the availability of recorded sessions from our previous online courses for structural engineers. These sessions cover a wide range of topics including earthquake resistant design, wind engineering, software training for STAAD Pro & ETABS, design of steel structures, etc. With a total of 98 sessions and over 140 contact hours, this library of recordings is a valuable resource for anyone looking to enhance their knowledge and skills in the field of structural engineering. The content of the course will be gradually released over the course of the 8-month duration, ensuring that participants have ample time to digest and apply the material. Don’t miss out on this opportunity to enhance your skills and stay ahead of the curve!

Click here for more details.

Feedback of few participants for previous online courses”

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Categories
Earthquake Engineering Structural Engineering

Session 60: Discussion on DRAFT IS 1893 (Part 1 & 2)

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Recently, BIS has published draft standard of IS 1893 (Part 1) and IS 1893 (Part 2).

Doc. No.Title
CED 39(22343)WCDraft Indian Standard Criteria for Earthquake Resistant Design of Structures Part 1 General Provisions [Seventh Revision of IS 1893 (Part 1)]      
CED 39(22345)WCDraft Indian Standard Criteria for earthquake resistant design of structures Part 2 Buildings [Seventh revision of IS 1893 (Part 1)]

Draft standard of IS 1893 (Part 1) contains general provisions on earthquake hazard applicable to all structures.

Draft standard of IS 1893 (Part 2) contains provisions specific to earthquake resistant design of buildings.

Links for downloading the documents:

https://www.services.bis.gov.in/tmp/WCCED21022345_26042023_1.pdf

https://www.services.bis.gov.in/tmp/WCCED21022343_26042023_2.pdf

There are significant changes proposed in the draft standards, few of the same are mentioned below:

IS 1893 (Part 1)

  • Earthquake zone map is revised
  • Design horizontal acceleration coefficients are specified for strength and serviceability
  • Design methodology included for Architectural Elements and Utilities (AEU)
  •  Categories of structures are included with requirement of different return period of earthquakes for strength and serviceability
  • Procedure included for site specific earthquake hazard
  • Performance expectation of the structure is detailed out.
  • Range of modulus of subgrade reaction is mentioned.
  • Soil stiffness calculations are added, etc.

IS 1893 (Part 2)

  • Criteria are added for masonry buildings and steel buildings
  • Response reduction factors are modified and renamed as Elastic force reduction factors
  • Provisions on torsion is updated
  • Structural plan density of the structural walls is varied with earthquake zone
  • For RCC buildings, stiffness modifiers have same values for strength and serviceability
  • Limits on lateral storey drift in building is mentioned with respect to seismic zone
  • Concept of torsional flexibility is added
  • Provisions added for buildings on sloping ground
  • Displacement calculations added for Architectural elements and utilities
  • Admissible structural systems in RC buildings for different earthquake zone is added.
  • Admissible structural systems in Steel buildings for different earthquake zone is added.
  • For steel buildings, for seismic zone 4, SMRF and EBF are suggested. For zone 5 & 6, only EBF is allowed, etc.

Last date for sending the comments to BIS is 25-Jun-2023.

As there are significant changes in the draft standards, we are planning to conduct the multiple sessions for the same. First of such session is planned on 18-MAY-2023 wherein Bhavin Shah (Founder & CEO, SQVe Consultants) will share his understanding of the documents from the perspective of practicing engineer.

In the following registration form, you may share the specific discussion points related to the draft standards which may be taken up during the live session.

If you are willing to address the audience as a speaker then please connect with us through email address:  contact@sqveconsultants.com

Schedule

Title: Discussion on draft standards | IS 1893 (Part 1) & (part 2)

DATE : 18-MAY-23

TIME : 8:30PM to 10:00PM IST

Brief about Expert

Bhavin Shah – Founder & CEO, SQVe Consultants

He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

STEEL-STR-006: Design of connections for steel structures | EUROCODE-3 | AISC 360-22 | IS 800:2007 | RAM connection

Design of connections for steel structures as per IS 800:2007 is still grey area. We have recently launched an online course to address the important area. In the course, we will discuss different limit states and different parameters for the connection design as per Eurocode-3 and AISC 360-22. Thereafter, we will address the connection design as per IS code. Software RAM connection will be used for the connection design during the program.

Click here for more details.

RS-STR-001: Get access to 98 recorded sessions

We are excited to announce the availability of recorded sessions from our previous online courses for structural engineers. These sessions cover a wide range of topics including earthquake resistant design, wind engineering, software training for STAAD Pro & ETABS, design of steel structures, etc. With a total of 98 sessions and over 140 contact hours, this library of recordings is a valuable resource for anyone looking to enhance their knowledge and skills in the field of structural engineering. The content of the course will be gradually released over the course of the 8-month duration, ensuring that participants have ample time to digest and apply the material. Don’t miss out on this opportunity to enhance your skills and stay ahead of the curve!

Click here for more details.

Feedback of few participants for previous online courses”

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Categories
Stability Certificate Structural Engineering

Session 59: Stability certificate

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

Stability certificates are important documents issued by structural engineers to confirm that a structure is stable and safe to use. These certificates are crucial for ensuring that buildings, bridges, and other structures are safe for the intended use. However, there can be several issues with stability certificates for structural engineers, including:

Lack of standardization: There is no standardized format or template for stability certificates, which can lead to inconsistencies and confusion. This lack of standardization can also make it difficult for stakeholders to compare and evaluate different certificates.

Inadequate assessment: In some cases, stability certificates may be issued without a thorough assessment of the structure’s stability.

Insufficient documentation: Stability certificates should be supported by detailed calculations and drawings that show how the engineer arrived at their conclusions. However, some certificates may lack sufficient documentation, making it difficult to verify the accuracy of the assessment.

Conflicts of interest: Structural engineers may have conflicting interests when issuing stability certificates, particularly if they are working for the developer or contractor who built the structure. In such cases, there may be pressure to issue a certificate even if the structure does not meet the required standards.

Inadequate communication: Structural engineers may not be aware about the modifications which are done on site or after execution of the project. The same might have impact on the validity of the stability certificate.

Changes in environmental conditions: Environmental conditions, such as earthquakes, floods, or strong winds, can affect the stability of a structure. Structural engineers may need to conduct additional assessments or issue new stability certificates in response to changes in environmental conditions.

Lack of ongoing maintenance: Stability certificates are often issued at the time of construction, but buildings and other structures can deteriorate over time. It is important to conduct ongoing assessments and maintenance to ensure that the structure remains stable and safe for the intended use.

Changing building codes and regulations: Building codes and regulations can change over time. So, the suitable clauses are to be added in the stability certificate.

It is essential for structural engineers to adhere to professional standards and ethical guidelines when issuing stability certificates. This includes conducting a thorough assessment of the structure’s stability, providing detailed documentation, and communicating any risks clearly to stakeholders. By doing so, engineers can help ensure that buildings and other structures are safe for the intended use.

In the upcoming live event, Er. Dr. Abhay Gupta (Director, Skeleton Consultants Pvt. Ltd.) will join us for the very important discussion.

It would be great if you can share your specific queries/doubts related to the subject in advance which would help us to structure the flow of discussion.

In the following registration form, you may share the specific doubts/questions related to the topic or you may share your point of view, discussion points, etc. which may be addressed during the session.

Schedule

Title: Stability Certificate | Q&A

DATE : 5-MAY-23

TIME : 8:30PM to 10:00PM IST

Brief about Expert

Er. Dr. Abhay Gupta (Director, Skeleton Consultants Pvt. Ltd.)

Dr. Abhay Gupta has obtained his BE(Civil) in 1981 & subsequently ME(Structures) from SGSITS Indore; and Ph.D. from University of Roorkee, Roorkee (now IIT Roorkee) in the area of “Aerodynamic Interference in Tall Rectangular Buildings: Wind Tunnel Studies” in 1996. He has more than 35 years of experience in the field of Civil Engineering construction and Structural design. Dr. Abhay Gupta is one of the Directors of Skeleton Consultants Pvt. Ltd. Noida. Dr Gupta has also worked as Principal consultant for establishment of Wind tunnel facility at Guna MP.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

STEEL-STR-006: Design of connections for steel structures | EUROCODE-3 | AISC 360-22 | IS 800:2007 | RAM connection

Design of connections for steel structures as per IS 800:2007 is still grey area. We have recently launched an online course to address the important area. In the course, we will discuss different limit states and different parameters for the connection design as per Eurocode-3 and AISC 360-22. Thereafter, we will address the connection design as per IS code. Software RAM connection will be used for the connection design during the program.

Click here for more details.

RS-STR-001: Get access to 98 recorded sessions

We are excited to announce the availability of recorded sessions from our previous online courses for structural engineers. These sessions cover a wide range of topics including earthquake resistant design, wind engineering, software training for STAAD Pro & ETABS, design of steel structures, etc. With a total of 98 sessions and over 140 contact hours, this library of recordings is a valuable resource for anyone looking to enhance their knowledge and skills in the field of structural engineering. The content of the course will be gradually released over the course of the 8-month duration, ensuring that participants have ample time to digest and apply the material. Don’t miss out on this opportunity to enhance your skills and stay ahead of the curve!

Click here for more details.

Feedback of few participants for previous online courses”

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Categories
Civil Engineering Earthquake Engineering Structural Engineering

Session 58: Retrofitting of existing structures in India

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

It’s necessary, now more than ever post Turkey Earthquakes, to seriously review the existing building structures for ensuring satisfactory performance even in high intensity earthquakes in India.

How safe are the existing structures in India during seismic events??… is a question we are being asked everyday.

I must mention an important fact here, before embarking on any further discussion on the subject, that National Building Code has mandated a Technical Audit of all public buildings more than 15m high, every 3 to 5 years, and buildings found unsafe to be sealed and duly retrofitted before being permitted to be used. These Audits must cover Structural Safety Audit as well as a comprehensive review of electrical and Fire installations as well as conformance to the latest bye laws and the Structural Audit thus carried out will be based on the latest revision of Earthquake Codes, and will bridge the compliance gap with Codal guidelines. It will also ensure safety of lives and safety of precious infrastructure in a serious earthquake close to the region so critical for a fast developing Indian economy. We cannot depend on Government alone to accomplish this Herculean effort and all individual building owners must come forward to get Structural Audits and Strengthen their building structures to make them safe and Code Compliant.

All existing buildings need to be reviewed with latest version of BIS Codes, duly allowing for a suitable reduction in Base Shear as per BIS 15988 and strengthening must be carried out to bring it to a Code compliant level. Else, Delhi NCR may witness scenes similar to Turkey and Syria or worse. Special focus must be given to Hospitals, schools, critical communications and Transport infrastructure (Especially Elevated Metro stations, which are all basically stilted structures with extreme mass and stiffness irregularity)

Ms. Sangeeta Wij

In the upcoming live event, Ms. Sangeeta Wij will join us for the very important discussion.

It would be great if you can share your specific queries/doubts related to the subject in advance which would help us to structure the flow of discussion.

In the following registration form, you may share the specific doubts/questions related to the topic or you may share your point of view, discussion points, etc. which may be addressed during the session.

Schedule

Title: Retrofitting of the existing structures in India for earthquake resistant design

DATE : 20-APR-23

TIME : 4:30PM to 6:00PM IST

Brief about Expert

mS. SANGEETA WIJ – Managing Partner (SD ENGINEERING CONSULTANTS LLP)

Carrying out Structural analysis, design and drawings work for a large no of Projects in NCR and pan India, as also review of many existing Projects, based on BIS Codes of Earthquake resistant designs and the best practices. For a good Structural Audit, complete due diligence is to be exercised and a Detailed Report presented to the Clients, highlighting the gaps in structural capacities and demand. It is now a challenge to correctly assess the feasibility of the retrofit scheme proposed with meeting the desired demand for various structural elements .

Mrs Wij graduated in 1982 and worked in RITES before staring her own consultancy form in 1996. Her firm SD ENGINEERING CONSULTANTS LLP has completed over a 1000 prestigious Structural engineering assignments for a large no of Metro stations(elevated and underground), Hospitals, Schools, Commercial, residential and Industrial Projects involving complex Steel and RCC designs. SDEC has been involved in Audits of Commercial Residential and Industrial Clients as also World Bank and NDMA looking for Higher level Advanced Analysis of Structures . Most Health facilities and Hospitals have been strengthened to achieve Immediate Occupancy level , as per NDMA Hospital Safety Guidelines.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

___________________________________________________

RS-STR-001: Get access to 98 recorded sessions

We are excited to announce the availability of recorded sessions from our previous online courses for structural engineers. These sessions cover a wide range of topics including earthquake resistant design, wind engineering, software training for STAAD Pro & ETABS, design of steel structures, etc. With a total of 98 sessions and over 140 contact hours, this library of recordings is a valuable resource for anyone looking to enhance their knowledge and skills in the field of structural engineering. The content of the course will be gradually released over the course of the 8-month duration, ensuring that participants have ample time to digest and apply the material. Don’t miss out on this opportunity to enhance your skills and stay ahead of the curve!

Click here for more details.

Feedback of few participants for previous online courses”

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Categories
Earthquake Engineering Industrial Structures Structural Engineering

Session 57: IS 1893 (Part 4)

INTRODUCTION

LIVE TECHNICAL DISCUSSION SERIES

India has already witnessed devastating earthquakes in the past and may witness even higher intensity of earthquakes in the future. Industrial structures are highly vulnerable during seismic events as they are irregular to meet the functional requirements. IS 1893 (Part 4) is addressing the aspects of earthquake resistant design of industrial structures in India.

Recently, BIS has published draft standard of IS 1893 (Part 4) for comments. Following are the details of the document:

  • Document Number : CED 39 (18642)WC
  • Title of the document : Draft Indian Standard Criteria for Earthquake Resistant Design of Structures, Part 4 Industrial Structures and Stack- like Structures, [Sixth Revision of IS 1893 (Part 4)]                                                                                                              

    Link for downloading the draft document:

    https://www.services.bis.gov.in/tmp/WCCED21018642_02022023_2.pdf

    There are several major changes made in the draft standard.

    We are planning to conduct live discussion for this important area.

    In the following registration form, you may share the specific points related to the topic which may be discussed during the session.

    Brief about Speaker

    Bhavin Shah – Founder & CEO, SQVe Consultants

    He is passionate about Engineering profession with two decades of experience. He is having a dream for enhancing the engineering profession in different organisations. He completed graduation in Civil Engineering and Masters in Structures from Sardar Patel University. He is having unique experience of working in the specialized firm of civil / structural consultancy which grew as multidisciplinary firm (VMS), large multidisciplinary firm (L&T Chiyoda Ltd.) and owner based engineering set up (Adani Infra (I) Ltd.). He worked in different organisations at different levels, starting from junior design engineer to CEO. He is Founder & CEO of SQVe Consultants. He is pursuing Ph.D. in Structural Engineering related to earthquake resistant design of industrial steel structures.

    Schedule

    Date: 23-MAR-23

    Time: 4:30PM to 5:30PM IST

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. .

    _____________________________________________

    An online course related to design of steel structures as per AISC 360-22 will commence from 15-MAR-23. The course will cover discussion on important clauses of the code AISC 360-22, AISC 341-16, AISC 358-16 as well as application of same in the software STAAD.Pro & RAM connection. The course will cover the important areas such as stability of structures, notional loads, P- delta analysis, direct analysis method, design of compression members with and without slender elements, design of member for bending, design of member for combined forces, design of simple connections, design of moment connections, earthquake resistant design aspects, etc. Click here for more details.

    Feedback of few participants for previous online courses”

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    Categories
    Earthquake Engineering Structural Engineering Turkey

    Session 56: Lessons learned from sequential EQs in Turkey

    INTRODUCTION

    LIVE TECHNICAL DISCUSSION SERIES


    ◼ Sequential of EQs were happened. Magnitude 7.8 happened at 4 am, and Magnitude 7.5 happened at 1 pm (many 6.5 in between). Record from one station indicates that PGA of the first mainshock was around ~0.7g. The spectral acceleration exceeded 2g around 0.5-0.6 seconds. Additionally, the vertical acceleration was ~1.4g.

    ◼ Over 10,000 buildings were collapsed by the EQs. And many of the buildings were built before 2000. So, they were designed based on old Turkish Code. Collapses were mostly multi-story/mid-rise (5-20 stories). They were mainly concrete buildings.

    ◼ Collapses should be evaluated in two categories; are collapses before the second mainshock and collapses after the second mainshock (plus aftershocks).

    ◼ Collapses before the second mainshock: Collapsed buildings were designed based on reduced EQ loads (using response modification factor (R)) by relying on ductility; however, the collapses showed nonductile behavior (brittle). Please, check both ductile and brittle collapse on the graph below. Basic ductile design philosophy is “survive the main shock, and get out of the building safely”. However, the collapses indicate that design reinforcements were didn’t supplied as required by the code. Designers – authority of jurisdictions – constructors should be one mechanism to follow the code instructions.

    ◼ Collapses after the second mainshock: Many of the collapses were obtained after the second main shock (Magnitude 7.5). The first main shock and aftershocks softened/weakened/hinged buildings, and the second mainshock destroyed most of the softened buildings. This is because of P-delta (large deformation). Why? Because it causes negative tangent stiffness on the buildings, and when it exceeds the plastic stiffness (hinged stiffness), buildings are collapsed due to instability. And the other consideration is fracture due to low cycle fatigue. Ductile elements have a finite accumulative strain capacity.

    ◼ Important lessons: One of the important lessons is missing sequential shocks specification on every seismic code in the world. It might be great research to study performance-based design for sequential shocks! Other one is determining/reviewing/retrofitting old buildings. Old buildings should get engineering services based on new code provisions.

    In the upcoming live event, Dr. T. Deniz Uludag will join us for the very important discussion.

    Please note that the discussion will be based on initial analysis/thoughts. We may organise more numbers of sessions in the future as and when more detailed analysis is shared by the investigation teams.

    It would be great if you can share your specific queries/doubts related to Turkey EQs in advance which would help us to structure the flow of discussion.

    In the following registration form, you may share the specific doubts/questions related to the topic or you may share your point of view, discussion points, etc. which may be addressed during the session.

    Schedule

    Title: Lessons Learned from Sequential Earthquakes in Turkey

    DATE : 28-FEB-23

    TIME : 9:30PM to 11:00PM IST | 9:00AM to 10:30AM MST

    Brief about Expert

    Dr. T. Deniz Uludag- Structural Engineer, PhD, EIT at Martin/Martin, Inc.

    Dr. T. Deniz Uludag is a PhD in earthquake engineering who was born, raised, educated in Turkey.  He has performed a lot of research on Turkey EQs and has connections to the field.

    He completed his Ph.D. under the supervision of Dr. Jay Puckett in Architectural Engineering (Structural) at the University of Nebraska-Lincoln (UNL). His specialization is in structural dynamics, performance-based design, and collapse prediction related to providing resilience for operational recovery after high-seismic events.

    He is working as an Engineer-In-Training (EIT) in the Structural Department in the Lakewood, Colorado office of Martin/Martin, Inc .

    During his academic career at UNL, Dr. Patrick McManus, is a principal in Structural Engineering at Martin/Martin Consulting Engineers, is/was his co-advisor and helped him to develop a novel structural system for seismic loads. This system is practical and directly applicable to professional practice in high-seismic areas. With Dr. McManus’s mentorship and encouragement, he gained an industry perspective paramount for his research and professional development in general. Dr. McManus serves on several AISC technical committees.

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

    ___________________________________________________

    An online course related to design of steel structures as per AISC 360-22 will commence from 15-MAR-23. The course will cover discussion on important clauses of the code AISC 360-22, AISC 341-16, AISC 358-16 as well as application of same in the software STAAD.Pro & RAM connection. The course will cover the important areas such as stability of structures, notional loads, P- delta analysis, direct analysis method, design of compression members with and without slender elements, design of member for bending, design of member for combined forces, design of simple connections, design of moment connections, earthquake resistant design aspects, etc. Click here for more details.

    Feedback of few participants for previous online courses”

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    Categories
    Civil Engineering Geotechnical Engineering Structural Engineering

    Session 55 : Advances in the state of practice of Geotechnical Investigations in India

    LIVE TECHNICAL DISCUSSION SERIES

    Current trends in Geotechnical engineering:

    • Geotechnical investigation practice is rapidly evolving from the classical era of Terzaghi, Horslev, Skempton and other masters of the twentieth century.
    • We are now constructing bigger structures on poorer strata
    • Developments and demands of the 21st century geotechnical practices have led to a greater emphasis on
      • in-situ tests
      • advanced testing tools
      • digital data acquisition
    • Increasingly complex nature of the problems encountered has presented challenges to the new generation of geotechnical engineers

    Challenges of the 21st century:

    • Use of powerful finite element software has generated a demand for more reliable geotechnical input data
    • The thrust is on developing more realistic design parameters, encroach upon the factor of safety and enhance the factor of reliability
    • Aspects to be addressed include
      • Perform a variety of in-situ and laboratory tests so as to predict parameters from different tests and develop correlations between various parameters,
      • Enhance precision of the tests, quality of data acquisition and reliability of test data, and
      • Use local experience regarding the soil behavior to minimize uncertainties in the selection of design parameters

    In the upcoming live technical discussion, Er. Sorabh Gupta – Director, Cengrs Geotechnica Pvt. Ltd. will join with us. He will share the insights on this extremely important subject.

    It would be great if you can share your specific queries/doubts related to geotechnical investigation in advance which would help us to structure the flow of discussion.

    In the following registration form, you may share the specific doubts/questions related to the topic which may be addressed during the session.

    Schedule

    DATE : 2-FEB-23

    TIME : 4:30 PM to 6:00 PM IST

    Brief about Expert

    Er. Sorabh Gupta – Director, Cengrs Geotechnica Pvt. Ltd.

    Sorabh is having 20+ years of experience in the field of geotechnical engineering. His special interests include Earthquake Engineering, including site-specific response assessment, soil-structure interaction during earthquakes, liquefaction assessment, etc. He has carried out advanced site characterisation at several sites, where he has amalgamated data from CHST, DHST, SASW and SRT with classical geotechnical parameters such as SPT, CPT, etc. He has also been actively promoting the use of advanced Foundation QA methods such as High-Strain Dynamic Pile Load Testing using PDA, Low-strain Pile Integrity testing (PIT), Cross-hole Sonic Logging (CSL), Parallel Seismic (PS), etc.

    He is a qualified internal auditor under ISO:17025-2005 Laboratory Management System, and he is responsible for maintaining quality in the Geotechnical Laboratory at Cengrs.

    He is active in several professional organizations, and am currently an Executive Committee Member of the Indian Geotechnical Society, New Delhi. He is also the recipient of the IGS Delhi Young Geotechnical Engineer Award, 2008.

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

    Launch of new series of live sessions for students and young engineers

    Brief about the first session: STU-STR-001: Approach towards Career in Structural Engineering

    Structural engineering is indeed a vast area and hence, there are number of different areas where the bright career can be developed. We will discuss the approach towards building the great career in the structural engineering profession.

    Fees: 200 INR per participant

    Click here for registration.

    Get access to 21 recorded sessions with 30+ contact hours for training related to  STAAD. Pro

    In the training module, from the basic to advanced functions of STAAD Pro are covered. It will include geometry generation, placement of columns & beams, application of loads, interpretation of the analysis results, design of major elements, etc. for RCC & Steel structures. The course will cover the advance topics like structural dynamics, FEM using STAAD.Pro.

    For more details click here.

    Get access to 16 recorded sessions with 24+ contact hours for training related to  ETABS

    In the course, we have covered overall understanding of the software, creation of geometry, moment releases, shell elements, modelling of shear wall, application of different loads, correct approach for wind load, temperature load, assign vertical seismic loads, scaling of earthquake force, stiffness modifiers, rigid vs flexible diaphragm, check for different irregularities as per IS 1893 (Part-1):2016, P-delta analysis, design of shear wall, design of beams – columns,

    For more details click here.

    For any specific training requirements related to structural engineering, please feel free to contact us through WhatsApp: +91 9909977325 or you may write to us at email address: contact@sqveconsultants.com

    Feedback of few participants for previous online courses”

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    Categories
    Structural behaviour Structural Engneering

    Session 54: Understanding of Structural Behaviour

    LIVE TECHNICAL DISCUSSION SERIES

    Graduates who have studied structures for four years cannot draw the bending moment on a loaded cantilever. Is this satisfactory??

    Episode 1: In the beginning…
    Episode 2: Testing the Arup graduates

    Source: https://www.davidbrohn.com/podcasts/

    The recent graduates can not draw the bending moment diagram and shear force for simple cantilevers! This situation is indeed quite dangerous as dependency on the computers is gradually increasing. The structural behaviour obtained from the computer analysis must be checked before proceeding for the next stage of design.

    Do we have any alternative means for verifying the structural behaviour instead of complex calculations?

    Source: https://www.davidbrohn.com/downloads/

    In the upcoming live discussion David Brohn, MBE PhD CEng FIStructE will join with us for the interesting live discussion related to understanding of the structural behaviour.

    It would be great if you can share your specific queries/doubts related to the subject in advance which would help us to structure the flow of discussion.

    In the following registration form, you may share the specific doubts/questions related to the topic which may be addressed during the session.

    Schedule

    DATE : 12-JAN-23

    TIME : 4:30PM to 5:30 PM IST

    Brief about Expert

    David Brohn, MBE PhD CEng FIStructE

    Brohn worked on the design of the Sydney Opera House Shells at Arup London. This was followed by post-graduate study and PhD at Leeds University. He became an academic at Bristol Polytechnic and in his first class, preparing students for the IStructE Chartered Membership exam, he found that they had a poor understanding of structural behaviour and devised a test. He then tested the graduate intake into Arup for three years which confirmed that there was a serious deficiency in understanding. Arup then commissioned Brohn to develop a training course to correct this lack of understanding and this course has been run for 50 years, to the leading consultants in the UK, Denmark and Dubai and India. 12 years ago the courses were redesigned for online delivery and are now available on the new site.

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

    An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

    Feedback of few participants for previous online courses"

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    Categories
    Combined Piled Raft Foundation Foundation engineering Geotechnical Engineering

    Design of Combined Piled Raft Foundation

    INTRODUCTION

    LIVE TECHNICAL DISCUSSION SERIES

    In the conventional pile foundation system, the entire load is transmitted to the piles through pile cap. However, in Combined Piled Raft Foundation (CPRF), the raft will also resist the load through contact pressure against soil beneath. For CPRF, the piles will be designed to undergo relatively higher displacement as compared to the conventional pile foundation to allow for the contact pressure between the raft and soil beneath. Hence, the settlement in CPRF system will be relatively higher than the conventional pile foundation system and at the same time diameter and number of piles will be lesser for CPRF as compared to the conventional pile foundation. Design of CPRF require extensive interface between geotechnical and structural engineers.

    Recently, BIS has published draft document for design and construction of CPRF. In the document important areas such as angular distortion, differential settlement, pile-soil interaction, pile-pile interaction, raft-soil interaction, pile-raft interaction, information required for CPRF design, design steps for CPRF design, proof of design and construction of CPRF, monitoring of CPRF, etc.

    Draft document from BIS can be downloaded from the following link:

    https://www.services.bis.gov.in/tmp/WCCED21221409_14122022_1.pdf

    We are planning to conduct live discussion for this important area. You may share the discussion points in the registration form which would help us to structure flow of the discussion.

    It would be great if you can share your specific queries/doubts related to the subject in advance which would help us to structure the flow of discussion.

    In the following registration form, you may share the specific doubts/questions related to the topic which may be addressed during the session.

    Schedule

    Date: 10-JAN-23

    Time: 8:30PM to 10PM IST

    (Schedule will be decided and will be communicated to the registered participants.)

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

    An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

    Feedback of few participants for previous online courses"

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    Categories
    Structural Engneering tensile fabric structures

    Session 53: Tensile Fabric Structures

    INTRODUCTION

    LIVE TECHNICAL DISCUSSION SERIES

    Tensile fabric structures are considered as special structures as they are not covered in detail in the code of practice. Also, the routine software may not be useful for performing the design of such structures. Each tensile fabric structure is unique!

    There are several questions related to design of tensile fabric structures:

    • Why does the tensile fabric require an analysis using specialized software? End of the day, it is just another roofing materials like polycarbonate sheet / metal roofing.
    • Conceptual design of tensile fabric & Structural system – does it need an input from a designer?
    • Why does the fabric require a slope and to maintain an anticlastic form?
    • How to estimate loads on the structure? Any thumb rules available using tributary area methods?
    • What are the software used for the analysis? What kinds of analysis are performed?
    • Selection of different types of fabric – based on strength Vs Performance Vs Fire classification
    • Comprehensive model of fabric, cables and steel for analysis and design – is it a myth or can provide lot of clarity as well as saving?
    • Is the sequence of installation critical for tensile fabric structure?
    • What is the importance of Biaxial test results in fabric?
    • Designing and detailing of membrane plates – is it a high precision activity in terms of structural calculation of components and detailing.
    • How to account for Impact of deformation steel structure supporting the fabric in terms of engineering as well as production and installation
    • Why Review, Inspection and Testing are important on tensile fabric structure projects.
    • As a proof-checking consultant, how to review the design calculations and drawings?
    • What are the quality assurance requirements?
    • What to inspect at site?

    Upcoming live discussion is scheduled in Q&A mode to address several queries of structural engineers related to tensile fabric structures.

    It would be great if you can share your specific queries/doubts related to tensile fabric structures in advance which would help us to structure the flow of discussion.

    In the upcoming live technical discussion, Mr. Raju Mahadevan will join us for the interesting discussion.

    In the following registration form, you may share the specific doubts/questions related to the topic which may be addressed during the session.

    Schedule

    DATE : 22-DEC-22

    TIME : 8:30 PM to 10:00 PM IST

    Brief about Expert

    Mr. Raju Mahadevan is Founder & Director of Techno Specialist Consulting Engineers and is based in Dubai.

    Mahadevan has more than 22 years of Civil & Structural Engineering experience in projects located in Asia, Middle East, Africa and USA. He has significant experience in the field of lightweight tensile fabric structures with low, medium and long spanning structures along with the skills in the development of detailed engineering deliverables, tender specifications, performance requirements in addition to specific expertise in inspection, testing and supervision of such installations. Mahadevan played important roles as a third-party inspection & certifying agency in this field. He has extended his experience and expertise in development of important constructions in the field of light-weight tensile fabric structures with remarkable achievements in terms of cost, quality and time. Mahadevan managed and delivered different levels of projects totaling to more than 2 million Sqm area of membrane.

    During the early stage of his career, he worked in many organizations engaged in contracting, fabrication, engineering consultancy, etc, which demanded high level of lateral thinking, imagination, and engineering skills not only in providing the solution – but also on the deeper aspects on, fabrication, construction and installation too.

    Mahadevan holds a post-graduation in Structural Engineering and a professional accreditation as Chartered Structural Engineer (IstructE UK). He also holds an MBA in Technology Management. Mahadevan is an accredited structural engineer from M/s Dubai Municipality for Steel Construction – Unlimited Heights. He offers lectures frequently to educational institutions, conferences and events. He promotes the development basic civil/structural engineering concepts at the grass-root level and innovative designs for customized solution.

    HOW TO REGISTER FOR THE EVENT?

    Registration is FREE. You may share the specific doubts/queries/discussion points which may be discussed during the session. It would help us to structure the discussion.

    An online course DYN-STR-001 : Design of Machine Foundations” will commence from 14-DEC-23. We will discuss step-by-step approach for the design along with software application. Book your seat now!

    Feedback of few participants for previous online courses"

    REVA VENU V M

    I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

    Supriya Pal

    I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

    Praveen Vasishth

    STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

    Rajashree

    The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

    Alok Rathore

    After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

    Nitin Sharma

    I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

    Mohd Ameen Irfan

    Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

    Dipal Trivedi

    The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

    Shefali Thakkar

    STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

    Chokshi Hem

    I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

    Srinivasa Reddy

    Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

    RATHISH V R

    I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

    Dr. Vinubhai Patel

    The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

    Rajen Dharia

    On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

    Akshay Thakur

    REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

    Prashanth N

    The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

    M. K. Haridharan

    In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

    D. Nivetha

    The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

    Dr. Raksha Parolkar

    Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

    Sharad Gupta

    I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

    Dhirender Singh Bisht

    I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

    Kamlesh Mehta

    In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

    Harikrishnan

    Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

    Akash Solanki

    STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

    Hiren Desai

    The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

    Ajay Narayan Jadhav

    WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

    Sujata Gupta

    It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

    Anvitha Yadama

    It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

    Shreyas Barad

    STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

    Tanuja Singh

    STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

    Er. Sachi Parekh

    I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

    I must say that he is a true professional academician
    Like a bridge between Institute and industry…

     

    Kunal Patil

    At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

    Mainak Ghosal

    The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

    Ajay Narayan Jadhav

    The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

    Praveen Upadhyay

    Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

    Haridharan M K

    The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

    Tarnpreet Singh Gill

    The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

    Ashish Sawant

    The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

    Mr. AJAY NARAYAN JADHAV

    JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

    ZEESHAN MUNSHI

    After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

    Anal Shah

    The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

    Ravichandra

    STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

    Hemanth Ponnuri

    STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

    Parth Gandha

    The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

    BHARATENDU PATEL

    This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

    JAKEER HUSSAIN

    WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.