Categories
Structural Engineering Wind engineering

IS 875 (Part 3):2015 | Session 90

INTRODUCTION

SQVE STRUCTURAL SUMMIT | SESSION 90

IS 875 (Part 3) : 2015, the Indian standard for wind loads on buildings and structures, is one of the very important document structural design practice. Whether you’re working on a low-rise industrial shed or a tall residential tower, this code plays a crucial role in estimating lateral loads and ensuring structural safety. With the document currently under revision, this is the ideal moment for the engineering community to come together and reflect on its application, effectiveness, and the challenges faced in real projects.

We are hosting an open brainstorming session that invites structural engineers, designers, consultants, and code users to share their doubts, practical difficulties, and grey areas they encounter while working with IS 875 (Part 3):2015. This is not a lecture — it’s a collective exchange of ideas. We encourage engineers to bring in queries related to wind speed zoning, interpretation of terrain categories, topography factors, pressure coefficients for different roof shapes, issues around the dynamic response of tall structures, cladding and façade design pressures, risk coefficient considerations, gust factor calculations, etc.

This session is meant to be a space to ask questions, share field experiences, and contribute ideas that may even influence how the revised code evolves. Whether you’re an experienced professional or a young engineer just stepping into structural design, your questions and insights are welcome.

You may share specific queries, doubts or discussion points related to IS 875 Part-32015 in advance through registration form.

Expert – Er. Dr. Abhay Gupta

Er. Dr. Abhay Gupta has obtained his BE(Civil) in 1981 & subsequently ME(Structures) from SGSITS Indore; and Ph.D. from University of Roorkee, Roorkee (now IIT Roorkee) in the area of “Aerodynamic Interference in Tall Rectangular Buildings: Wind Tunnel Studies” in 1996. He has more than 35 years of experience in the field of Civil Engineering construction and Structural design. Dr. Abhay Gupta is one of the Directors of Skeleton Consultants Pvt. Ltd. Noida. Dr Gupta has also worked as Principal consultant for establishment of Wind tunnel facility at Guna MP.

Schedule

DATE: 24-APR-25

TIME: 8:00PM TO 9:30PM IST

HOW TO REGISTER ?

Registration is FREE.

In the following registration form, you may mention specific discussion points related to IS 875 (Part 3) : 2015 .

Access recorded sessions of previous online courses

SQVe Consultants has successfully launched multiple unique online courses over the past four years, addressing current industry challenges and their solutions. These courses have covered a wide range of topics, including wind engineering, earthquake-resistant design, machine foundation design, pipe-rack design, steel and RCC structure design, PEB structures, liquid retaining structures, foundation design, nonlinear dynamic analysis, design of connections, etc. The courses focused on the latest provisions of key IS codes such as IS 800:2007, IS 16700:2023, IS 1893 (Part 1):2016, IS 1893 (Part 2):2014, IS 1893 (Part 4):2024, IS 13920:2016, IS 3370:2021, etc. along with software applications like STAAD Pro, ETABS, RCDC, RAM Connection, SAFE & STAAD Foundation Advanced. For steel structure design, specialized courses on AISC 360-22 and EUROCODE-3 were also conducted.

In total, 16 unique online courses have been delivered, comprising 247 sessions and 370+ contact hours. The complete list of 247 sessions with titles is provided in Annexure A, while links to individual courses can be found in Annexure B of this document.

Download brochure of recorded sessions


We take this opportunity to thank all participants for their support and valuable feedback, which continues to inspire us in expanding these learning initiatives.


All recorded sessions from these courses are available for self-paced learning, allowing engineers to access them at their convenience. Based on inquiries from professionals and the most popular course combinations, we have structured 11 specialized packages by clubbing 247 sessions from 16 online courses

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Get access to free e-books:

  1. Design of gravity columns: https://academy.sqveconsultants.com/offers/sGWGCTth/checkout

Comments on draft of IS 1893 (Part 4): https://academy.sqveconsultants.com/offers/KsFTBovx/checkout

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (21K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (9K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

Feedback of few participants for previous online courses”

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Categories
Bridge Engineering Structural Engineering

Session 78: Bridge Engineering | Software applications | MIDAS

INTRODUCTION

SQVE STRUCTURAL SUMMIT

Bridge engineering is complex, involving structural, environmental, and societal factors. Structural engineers handle intricate designs, from simple to elaborate structures, considering traffic, wind, earthquakes, temperature loads, etc. Material choice, construction, and maintenance affect bridge durability. Environmental aspects like river flow and geology impact planning. The challenge lies in balancing expertise, innovation, and the community needs to build lasting structures that benefit society.

Software applications are vital in bridge engineering, streamlining analysis, design, and collaboration. They enable modeling of complex structures, prediction of structural responses under various conditions, and optimization of designs. This aids in ensuring safety, efficiency, and cost-effectiveness in bridge projects. Additionally, software facilitates collaboration among multidisciplinary teams, enhancing communication and workflow efficiency. Software applications play a crucial role in delivering reliable and resilient bridge infrastructure.

In the upcoming live discussion, we are going to talk about software applications in bridge engineering. We are planning to address some of the challenges being faced by structural engineers in the bridge engineering while using MIDAS software. In the live discussion, Er. Nandeep Gohil (Technical Director @ Midas R&D) will attempt to answer few of the areas along with application in the software wherever required.

To organise content of the session, please share the specific queries which you would like to get addressed in the session. Some of the areas are mentioned below for which the specific queries may be shared:

  • Modeling Complex Geometries
  • Parametric Modeling Capabilities
  • Material Modeling and Property Assignment
  • Load Definition and Application
  • Boundary Conditions and Constraints
  • Importance of Construction Sequence
  • Buckling Analysis
  • Geometric & Material Non-Linear Analysis
  • Soil-Structure Interaction
  • Dynamic Response and Vibration Analysis
  • Code Compliance and Design Optimization
  • Post-processing and Results Interpretation, etc.

You may mention the specific queries related to the above mentioned areas in the registration form. We may attempt to address some of the queries in the first session and based on response from engineers, we may decide to organise more such sessions in the future.

Schedule

DATE : 27-APR-24

TIME : 8:30PM TO 10:00PM IST

Brief about Expert

Er. Nandeep Gohil (Technical Director @ Midas R&D)

Nandeep Gohil did his B.Tech Civil & M.Tech in Structural engineering from SVNIT, Surat.  He joined Jacobs-CES after his post-graduation and worked as bridge design engineers primarily on Indian Highway projects.  Since his association with Midas R&D Centre India almost 10 years ago, he has worked on wide variety of bridge structures like extradosed bridges, suspension bridges, spine & wing girder bridges, steel composite bridges and so on.  The scope of work involved generating specifications for the bridge software development (midas Civil) as well as assisting the clients in solving the technical issues in usage and validation of the software.

HOW TO REGISTER FOR THE EVENT?

Registration is FREE.

In the following registration form, you may mention specific queries related to software applications in bridge engineering . We will discuss the same during the live session.

Get access to recorded sessions of previous online courses:

EQ-STR-004: Different types of analysis for earthquake resistant design | ETABS Link: https://sqveconsultants.com/eq-str-004

DYN-STR-001: Design of Machine Foundations | STAAD Pro Link: https://sqveconsultants.com/dyn-str-001

STEEL-STR-001: Decode IS 800:2007 along with software | STAAD Pro Link: https://sqveconsultants.com/steel-str-001

STEEL-STR-005: Design of steel structures as per AISC 360-22 | STAAD Pro Link: https://sqveconsultants.com/steel-str-005

RCC-STR-001: Design of RCC structures (Part 1) Link: https://sqveconsultants.com/rcc-str-001

REC-STR-001Access recording of online courses | Get access to recording of earlier online courses related to wind engineering, earthquake resistant design, design of steel structures, applications in software ETABS & STAAD.Pro. There are total 98 sessions and 140+ contact hours. Link for more details: https://academy.sqveconsultants.com/rec-str-001

REC-STR-004 : Access recording of online courses |  Design of Steel structures Get access to recording of earlier online courses related to design of steel structures which include important  discussions related to design standards such as IS 800:2007, NBC 2016, AISC 360-22, AISC 341-16, EUROCODE-3 along with software applications in  STAAD Pro & RAM connection. There are total 57 sessions with 85+ contact hours. Link for more details: https://academy.sqveconsultants.com/rec-str-004

Join YouTube channel of SQVe Academy | Join our YouTube channel and be part of our mission to offer free live sessions for structural engineers. By subscribing monthly, you’ll not only support this initiative but also enjoy exclusive access to member-only videos. The subscription comes with the flexibility to cancel anytime, ensuring convenience for you. Your participation will help us sustain and enhance the quality of content for our community.

Link showing playlist of member-only videos: https://www.youtube.com/playlist?list=UUMOwkjEFL_gGDE6peoapW8Few

You are welcome to join the channel at following link: https://www.youtube.com/channel/UCwkjEFL_gGDE6peoapW8Few/join

Purchase E-books by Er. J. D. Buch

Publication of books on structural engineering is the result of experience of Er. J. D. Buch over 30 years with Kothari Associates Pvt. Ltd, a firm of Architects & Engineers, New Delhi, on design of various structures. Link for more details: https://sqveconsultants.com/e-books-by-er-j-d-buch/

Watch free sessions related to structural engineering at YouTube channel of SQVe Academy (11.7K + subscibers):

Link: https://youtube.com/c/StructuralEngineering

Join telegram group for technical discussion related to structural engineering (8K + members):

Link: https://t.me/structuralengineering1

Register to receive updates from SQVe through email:

Link: https://sqveconsultants.com/register

Join WhatsApp Community of SQVe Academy | You will receive details for joining free sessions for structural engineers as a part of SQVe Structural Summit, important updates, etc. Link: https://chat.whatsapp.com/JHSph6kemaGJLMasodebhW

________________________________________________

STEEL-STR-007: Design of PEB Structures (Part 1) | Warehouse | STAAD Pro | RAM Connections | RCDC

The course commenced on 28-MAR-24. If you wish you may register now and you will get access to the previous recorded sessions along with the course material.

Highlights of the course:
a) We will start the course with basic understanding of structural behaviour and stability concepts for shed type of structure. The important limit states such as flexure buckling, lateral torsional buckling, local buckling, etc. will be explained through finite element modelling of the individual members.
b) Interaction between different structural elements such as column, rafter, purlin, sag rod, girts, sheeting, flange bracing, etc. will be explained in detail.
c) Case study of two warehouse structures (with and without central column), covering the following steps:
           o 𝘗𝘳𝘦𝘱𝘢𝘳𝘪𝘯𝘨 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘢𝘭 𝘴𝘺𝘴𝘵𝘦𝘮, 𝘨𝘦𝘰𝘮𝘦𝘵𝘳𝘺 𝘨𝘦𝘯𝘦𝘳𝘢𝘵𝘪𝘰𝘯, 𝘸𝘪𝘯𝘥 𝘢𝘯𝘥 𝘴𝘦𝘪𝘴𝘮𝘪𝘤 𝘭𝘰𝘢𝘥 𝘤𝘢𝘭𝘤𝘶𝘭𝘢𝘵𝘪𝘰𝘯𝘴, 𝘭𝘰𝘢𝘥 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴 𝘪𝘯 𝘵𝘩𝘦 𝘴𝘰𝘧𝘵𝘸𝘢𝘳𝘦, 𝘭𝘰𝘢𝘥 𝘤𝘰𝘮𝘣𝘪𝘯𝘢𝘵𝘪𝘰𝘯𝘴,  𝘱𝘦𝘳𝘧𝘰𝘳𝘮𝘪𝘯𝘨 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘰𝘧 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘦, 𝘥𝘦𝘧𝘪𝘯𝘪𝘯𝘨 𝘥𝘦𝘴𝘪𝘨𝘯 𝘱𝘢𝘳𝘢𝘮𝘦𝘵𝘦𝘳𝘴 𝘧𝘰𝘳 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘢𝘭 𝘦𝘭𝘦𝘮𝘦𝘯𝘵𝘴, 𝘥𝘦𝘴𝘪𝘨𝘯 𝘰𝘧 𝘵𝘺𝘱𝘪𝘤𝘢𝘭 𝘮𝘦𝘮𝘣𝘦𝘳𝘴, 𝘤𝘰𝘯𝘯𝘦𝘤𝘵𝘪𝘰𝘯 𝘥𝘦𝘴𝘪𝘨𝘯 𝘰𝘧 𝘵𝘩𝘦 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘦 𝘶𝘴𝘪𝘯𝘨 𝘙𝘈𝘔 𝘤𝘰𝘯𝘯𝘦𝘤𝘵𝘪𝘰𝘯 𝘴𝘰𝘧𝘵𝘸𝘢𝘳𝘦, 𝘧𝘰𝘶𝘯𝘥𝘢𝘵𝘪𝘰𝘯 𝘥𝘦𝘴𝘪𝘨𝘯 𝘶𝘴𝘪𝘯𝘨 𝘙𝘊𝘋𝘊 𝘴𝘰𝘧𝘵𝘸𝘢𝘳𝘦, 𝘦𝘵𝘤.
d) Design of the structures will be performed using IS 800 : 2007.
e) Analysis and design will be performed using software STAAD Pro, RAM connection and RCDC.
f) Manual calculations for verifying design from the software, etc.

Feedback of few participants for previous online courses”

Anvitha Yadama

It has been an excellent course and given me an in-depth understanding on ETABS and STAAD.Pro software . I feel more confident in my understanding and it helped me complete my major project in my B. Tech course .Thank you for all the support and excellent teaching. During the training program all my queries were answered quickly.

Dr. Raksha Parolkar

Topics covered in WIND-STR-002 were new for me to understand, as it has never been covered in syllabus. But the way Dr. Abhay Gupta sir taught, explained the problems and shared his experiences, the subject got easy to understand. I feel proud of being his student.

Shreyas Barad

STEEL-STR-001 is much awaited course. Finally the industry expert teaching the right thing with right methodology. I had never seen such an excellent online course like this. The amount of knowledge and engagement was extremely good. Thank you so much for the wonderful course.

Rajen Dharia

On attending to STEEL-STR-01 course with the multi discipline participates from across India is the best part of this course. As the questions raised and its solutions, are many a times very new for each other during the sessions which enhance our knowledge in different practical applications and approach towards it’s solution. I Recommend to join STEEL-STR-01 to all upcoming Structural Engineers.

Rajashree

The course WIND-STR-001 facilitated discussion and understanding of concepts  in more detailed simplified manner under the experienced and knowledgeable professionals. Thank you Dr Abhay sir and Bhavin sir.

Er. Sachi Parekh

I appreciate the course structure designed by Er. Bhavin Shah , which includes the theory and implementation of coddle provisions to software and interpretation of results. By attending it, I am able to learn and explore the analogy of a software – Staad Pro. Thank you very much for sharing the knowledge and make my doubts crystal clear…

I must say that he is a true professional academician
Like a bridge between Institute and industry…

 

Anal Shah

The course WIND-STR-002 was so interactive and Dr. Abhay Gupta was so kind enough to listen to all queries and answer them in very great detail. Also time spent by Dr. Gupta is highly appreciated. Great job Dr. Gupta in spreading the knowledge.

Harikrishnan

Faculty engineering knowledge is excellent. These course STEEL-STR-001 is useful for fresher and experienced person.

Tanuja Singh

STEEL-STR-001 : Excellent initiative to bring clarity of concepts to professionals.

Parth Gandha

The course STAAD-STR-001 was really amazing an knowledgeable. As I fresher I gained so much knowledge about all the little things I didn’t know that were so much important. Troubleshooting of the software was the most important topic as a single wrong interpretation of the warning can totally change the outcome. I heartily thanks Shri Bhavin bhai and SQVE consultants for introducing such wonderful courses so that we can perform good in practice.

Ravichandra

STEEL-STR-001 is very wonderful course. I have learned many things through this course. During session Bhavin sir interaction with the participants is very great with clear explanations. We are expecting these type of courses in future also.

Tarnpreet Singh Gill

The course content for STEEL-STR-001 has been thoroughly devised to be effective in best manner. Sharing of Recorded Sessions was the best part as I myself missed few end sessions due to office pressure but I could complete these later on. Making a permanent whatsapp group for discussion was also a good idea.

Sujata Gupta

It gives a good awareness about software as well as corresponding codal provisions. So one can get technical knowledge as well as how software using clauses giving in codes. Teacher is very patient, soft spoken and knowledgeable person. Topics selected in the course STEEL-STR-001 are very relevant, useful and to the point for design and analysis of steel structure.

RATHISH V R

I really enjoyed throughout the journey of the course STEEL-STR-001 wherein I improved by Fundamental Knowledge in the Design of Steel Structures. Bhavin Sir’s explanation on Lateral Torsional Buckling and other critical areas, really helped me to become sound in manual calculations. Keep continuing the good work!

JAKEER HUSSAIN

WIND-STR-002 : Explanation regarding wind action and building response due to wind, and the way of clarifications to participants questions by Dr. Abhay Gupta sir was excellent. Looking forward to attend relevant upcoming webinars/courses.

Prashanth N

The course STEEL-STR-001 was well planned and the sessions were very interactive and informative.

BHARATENDU PATEL

This course related to STAAD.Pro and case studies was beyond the conventional software training. It helped me conceptualise the idea behind the behaviour of any structure, understand the special requirements between steel and concrete structures. Real life case study and interactive sessions made the learning more impactful.

Akash Solanki

STEEL-STR-001 was the best package for understanding the limit state design of steel structures using IS800:2007 along with its application in STAAD.Pro. Tremendous wealth of knowledge from Bhavin sir combined with queries by other participants really facilitated a great learning experience. Thank you for such an amazing course. I hope more such courses are on the way.

Dr. Vinubhai Patel

The course WIND-STR-002 was really very much informative and useful. Enjoyed a lot.

M. K. Haridharan

In the course ETABS-STR-001, all the session are very interactive, it has a touch with theory, hands on training and practical aspects. The knowledge of the mentor is extraordinary in all aspects.

Ajay Narayan Jadhav

The course WIND-STR-001 provided Excellent clarifications on IS875 clauses.

Hemanth Ponnuri

STEEL-STR-001 course is very informative and very well explained about the hidden insights in the IS800 code.

Chokshi Hem

I heard somewhere that we shall never use STAAD for dynamic analysis. But that wrong interpretation of the software was cleared through the course : STAAD-STR-001.

D. Nivetha

The Staad Pro Training sessions were extremely fruitful, informative and it gave deeper insights into the field of structural engineering. Bhavin sir had not only taught us the software of Staad Pro, but he had explained us several technical concepts based on his field experiences. It was an interactive session where sir had asked us questions and it helped us think a lot and come up with solutions. Overall, it’s been a great experience and this 25 day of training has taught me a lot and has inspired me to develop greater passion towards civil engineering.

Praveen Vasishth

STEEL-STR-001 is very useful course for updating to new code for steel design of buildings.

Haridharan M K

The online course EQ-STR-001 was very informative and it covered all the aspects of IS1893, IS16700, IS13920 and more important sharing the videos of the course which enabled to go through at any time.

Praveen Upadhyay

Bhavin Shah is a fantastic trainer, very friendly and encouraging, it was a well-delivered and presented course (STAAD-STR-001) that was well received by the group. There was a great balance between theory and practice and the concepts were clearly and professionally explained.

Dipal Trivedi

The course GEO-STR-001 effectively addressed the gap between geotechnical and structural engineer. It not only covers important interface areas but also discusses consequences of poor interface. Subject experts have in depth knowledge and experience to address expectations of various participants ranging from fresh engineering graduate to highly experienced professionals. The course is interactive and experts are more than willing to address any queries of the participant. The course content is appropriately divided into multiple sessions over the weekend to allow flexibility to participants to participate and reflect during the week at their convenience. Overall, this course is highly recommended for structural and geotechnical engineers for gaining and enhancing the understanding of the very important interface between geotechnical and structural engineering work.

Sharad Gupta

I am very grateful to Er. Dr. Abhay Gupta and Mr. Bhavin Shah for sharing your knowledge with us even though we have the same profession. Your course WIND-STR-002 helped me to clear many of the doubts I had sine the past 20 years.

Mr. AJAY NARAYAN JADHAV

JUST TO APPRECIATE THE WORKSHOP STAAD-STR-001, IT HAS BEEN VERY USEFUL FOR ME. I WOULD LIKE TO HIGHLIGHT THE DYNAMIC OF THE SESSIONS, VERY ACTIVE, INTERESTING, AND WELL ORGANISED AND GREAT TO SHARE EXPERIENCES. MANY THANKS TO THE SPEAKER AND ORGANISERS!!…..ONCE AGAIN THANK YOU FOR SHARING AN INSPIRING LEARNING EXPERIENCE 👍

Kamlesh Mehta

In the course WIND-STR-002, I was not able to attend few lectures due to internet connectivity problem. But I have gone through the video lectures provided by Mr. Bhavin shah and it is positive point that any time any where we can watch and update our knowledge.

Mainak Ghosal

The Course WIND-STR-002 was very effective. It changed my perspective on not only wind engineering but also seismic loading analysis. Dr.Gupta also referred some excellent books which would not have been possible otherwise. Last but not the least, Dr. Gupta was kind enough to give me the charges of highlighting the errata for the Explanatory Handbook on Wind Engineering.

Hiren Desai

The course WIND-STR-002 is very much informative as well as useful for practicing engineers considering the non availability of easy to detailed literatures and practical examples.

Mohd Ameen Irfan

Bhavin Sir is very experienced and expert in his field, He made the topics in online course STAAD-STR-001 very clear from the scratch and also addressed every student’s queries and problems very nicely!!!

Alok Rathore

After attending the course WIND-STR-001, I change my prospective towards structure and learn many concept.

ZEESHAN MUNSHI

After attending online course STAAD-STR-001, I m very happy to share that….now I understand the result which I get after analysis……and how to use or understand the STAAD editor. Thank u so much for that…!!

Supriya Pal

I AM A PHD SCHOLAR AND WORKING IN THE FIELD OF WIND STRUCTURE INTERECTION. I GOT A LOT OF MY DOUBTS CLEARED THROUGH THIS COURSE : WIND-STR-002. THANKYOU VERY MUCH

Ajay Narayan Jadhav

WIND-STR-002 : Excellent sessions. Thanks a lot to team SQVe and the eminent speaker for giving a valuable knowledge.

Nitin Sharma

I would like to thanks and appreciate for this helpful course comprising of STAAD PRO Training and Design concepts for RCC and Steel. In this module I have learned in detail about essential concepts for designing industrial buildings and gained an understanding of different types of Analysis. I also acquired the knowledge of different types of Codes. Moreover, l was introduced with FEM, design of foundation, anchor bolts and connections. All the sessions were very interactive and engaging. The valuable knowledge that i have gained in these two months will certainly be propitious to start my career as a structural engineer.

Akshay Thakur

REC-STR-001: The recorded sessions are more than anything for tackling practical difficulties…. and you bring some other professionals like dr. Jain and dr. Gupta is just like awesome experience for the student like me who are from tier-3 college who won’t get such a precious information… thanks to you also for the knowledge you impart… best luck to you and your team for this your initiative to resolve practical difficulties among aspiring structural engineers… 🙏🏻 once again thank you so much… because nobody in today’s era from structural engineering domain is wants to share the information, but you do… kudos!

Shefali Thakkar

STEEL-STR-001 was the best interactive course ,wherein all practical facts and limitations those are related with prevailing standards, software and practices were discussed. Vision was provided to participate towards solving such prevailing limitations rather following the same collaboratively. Course content was described very effectively and constant encouragement on experiments of the course deliverables and raising doubts and solving the same. Effective time management by faculty to satisfy all participants’ queries along with effective delivery of course content. 24 hour interaction facility was made available for solving course related queries.

Dhirender Singh Bisht

I am pursuing masters in structural engineering and steel was the topic that I found always challenging since my B.Tech times. Moreover this is also a missing topic for the syllabus of many universities in masters program. To understand its theory ,and execute it practically in software is really challenging and need a mentor for that. I’ve been following Bhavin sir from last few months and was it was my good decision to choose him as a guide. By the course STEEL-STR-001, now I can feel that I am in a position to explore boundaries of IS code, and also I’m enthusiastic to see how Euro code, AISC code and other countries code tackles the problem which sounds to be complicated in IS code.

REVA VENU V M

I am a budding geotechnical engineering professional. For three years I have worked as faculty in NIT and recently joined as project fellow- geotechnical engineering in a research Institute. Now I am in the transition phase of my career ie, shifting from academics to industry. My desire to become a geotechnical engineering consultant inspired me to join this course. As I don’t have much industrial exposure, attending the course GEO-STR-001 helped me to gain a lot of practical knowledge related to geotechnical engineering. Especially the discussions related to soil investigation, interpretation of soil report and interactive sessions were really amazing. Queries of other participants and the discussions associated with it,were really informative, as it mainly focussed on current industrial practices. Thank you Vivek sir and Bhavin sir for giving this wonderful opportunity. Hoping for a better support in my future endeavours too. Also expecting further courses related to this, in the coming future.

Srinivasa Reddy

Dear Sir thank you so much for your Course ETABS-STR-001. We learn Lot from here. Happy to Join this Course we are waiting for next Upcoming Courses.

Kunal Patil

At first I never expected the sessions which are going to be conducted would be so knowledgeable. Day by day listening to Abhay sir touching every aspect from the codal point of view, few from his own experience. The mixture of everything made this course WIND-STR-002 very valuable and useful. Before this course I was trying to learn from everywhere how does this wind dynamic forces are to be calculated but through SQVE consultants arranging this webinar and learning under experience fraternity was worthwhile.

Ashish Sawant

The course WIND-STR-001 is very informative. It clears basics of overall concept of wind flow. Thanks to Bhavin sir and Gupta sir for your guidance on wind loading.